DIY thread: fiberglass brake cooling inlet ducts for Evo 8/9 C-West bumper cover
#1
DIY thread: fiberglass brake cooling inlet ducts for Evo 8/9 C-West bumper cover
Dunno how many track day people here have a C-West front bumper cover, but just in case (or, if you're thinking about putting a C-West style bumper on your car, here's an extra reason to do it):
https://www.evolutionm.net/forums/ev...ml#post9187001
If nothing else, it thoroughly documents the process for making a custom fiberglas duct or vent—certainly a project someone here in the Motorsports subforum may be contemplating.
A few pics:
https://www.evolutionm.net/forums/ev...ml#post9187001
If nothing else, it thoroughly documents the process for making a custom fiberglas duct or vent—certainly a project someone here in the Motorsports subforum may be contemplating.
A few pics:
#3
Good eye: the oil cooler (and engine) is removed from the car right now, hence the clear view of the tire tread on the passenger side in that one picture above.
But normally my OEM cooler is mounted in the OEM location. The silicone hose on the passenger side is normally ziptied to the bottom of it and the oil lines, actually.
Old pic:
But normally my OEM cooler is mounted in the OEM location. The silicone hose on the passenger side is normally ziptied to the bottom of it and the oil lines, actually.
Old pic:
Last edited by EGbeater; Mar 25, 2011 at 10:09 AM.
Thread
Thread Starter
Forum
Replies
Last Post
EGbeater
Evo Electrical / Audio / Security
28
Jul 18, 2019 01:24 PM
EGbeater
Evo How Tos / Installations
111
Sep 19, 2016 05:50 PM
EGbeater
Evo Engine / Turbo / Drivetrain
38
Apr 25, 2015 10:22 AM
EGbeater
For Sale - Wheels / Tires
3
May 3, 2010 11:06 AM