Worcester/Boston Social Thread
naw i'm def going HFC... i wanna keep her legal. i still wish i jumped on that error turcos found on lancershop...
the catback thing is undecided. i very well may stick with the stocker. i think once the audi is squared away and fully legal im going to really start thinking about what i want to do to the evo this summer. i gotta do an oil change, plugs and fluids soon.
the catback thing is undecided. i very well may stick with the stocker. i think once the audi is squared away and fully legal im going to really start thinking about what i want to do to the evo this summer. i gotta do an oil change, plugs and fluids soon.
Just playin'! I think...
The cobb is 50 state legal. Yeah i just wanted to make sure he saw that before he ruined such an expensive set of plugs.
I have $$ in my pocket for you! If you bring them to work with you tomorrow, I can meet you after work? I hate owing people $$!
Thread Starter
Evolving Member
iTrader: (7)
Joined: Jun 2007
Posts: 359
Likes: 0
From: Northborough, MA

that works if you want. just try to call and remind me tonight. i figured we'd all be meeting up at davids at some point soon and i'd bring them then.
Thread Starter
Evolving Member
iTrader: (7)
Joined: Jun 2007
Posts: 359
Likes: 0
From: Northborough, MA
i think in jersey the police actually have mirrors and infrared to look under the car.
From denso's website:
Q. How do I gap Iridium plugs
A. Before attempting to gap any DENSO Iridium Power spark plug, please review the specification chart to see the factory-preset gap. In most cases your Iridium Power plugs do not need to be gapped. Even with small variations in the factory set gap the ultra-efficient firing power design will compensate for those small variations. Should you decide to re-gap your Iridium Power plug, use extreme caution as improper gapping may damage or destroy the Iridium center electrode or porcelain center. To increase the gap size: Step 1 Use needle nose pliers or spark plug gapping tool to bend the ground strap up to the desired height. DO NOT LET THE PLIERS OR GAPPING TOOL TOUCH THE IRIDIUM CENTER ELECTRODE OR PORCELAIN. Step 2 Re-check the gap with a calibrated gapping tool. To decrease the gap size: Step 1 Use the same method as above, however bend the ground strap down to the desired height. DO NOT LET THE PLIERS OR GAPPING TOOL TOUCH THE IRIDIUM CENTER ELECTRODE OR PORCELAIN. Step 2 Re-check the gap with a calibrated gapping tool. WARNING: Failure to follow these directions may permanently damage the spark plug. Note: Never use a round gapping tool to check the gap or to increase or decrease the gap setting.
Most places tell you to just not regap them.
Q. How do I gap Iridium plugs
A. Before attempting to gap any DENSO Iridium Power spark plug, please review the specification chart to see the factory-preset gap. In most cases your Iridium Power plugs do not need to be gapped. Even with small variations in the factory set gap the ultra-efficient firing power design will compensate for those small variations. Should you decide to re-gap your Iridium Power plug, use extreme caution as improper gapping may damage or destroy the Iridium center electrode or porcelain center. To increase the gap size: Step 1 Use needle nose pliers or spark plug gapping tool to bend the ground strap up to the desired height. DO NOT LET THE PLIERS OR GAPPING TOOL TOUCH THE IRIDIUM CENTER ELECTRODE OR PORCELAIN. Step 2 Re-check the gap with a calibrated gapping tool. To decrease the gap size: Step 1 Use the same method as above, however bend the ground strap down to the desired height. DO NOT LET THE PLIERS OR GAPPING TOOL TOUCH THE IRIDIUM CENTER ELECTRODE OR PORCELAIN. Step 2 Re-check the gap with a calibrated gapping tool. WARNING: Failure to follow these directions may permanently damage the spark plug. Note: Never use a round gapping tool to check the gap or to increase or decrease the gap setting.
Most places tell you to just not regap them.


