Shiv from Vishnu tuning your car on our dyno?
Apr 24, 2003, 06:51 PM
#1
Newbie
Thread Starter
Join Date: Mar 2003
Location: Portland, OR
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Shiv from Vishnu tuning your car on our dyno?
We/Vishnu are curious if there is any interest in Shiv and Brett coming up to have them tune cars on our Mustang AWD dyno.
They'd be doing Xede's($795) on stock or modified cars. Tuning by Shiv would be extra at $200/hr(they estimate they'd only need about an hour for tuning a modified car).
We would need 10 people for them to come up. WRX's are welcome too.
Please let us know if there is any interest.
TIA,
Jeremy
Matrix Engineering
*Your NW Vishnu install center*
They'd be doing Xede's($795) on stock or modified cars. Tuning by Shiv would be extra at $200/hr(they estimate they'd only need about an hour for tuning a modified car).
We would need 10 people for them to come up. WRX's are welcome too.
Please let us know if there is any interest.
TIA,
Jeremy
Matrix Engineering
*Your NW Vishnu install center*
Apr 26, 2003, 07:50 PM
#5
Newbie
Thread Starter
Join Date: Mar 2003
Location: Portland, OR
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by jman425
i'm getting the xede already. cant you tune with the software provided ? also, will it be any better than the maps already pre-loaded at vishnu ?
i'm getting the xede already. cant you tune with the software provided ? also, will it be any better than the maps already pre-loaded at vishnu ?
You can only tune the XEDE if you buy the software to tune it.
The MAN Shiv will be up here himself to tune your exact car. If you already have the XEDE, then the maps are very similar.
HTH,
Jermy
Apr 28, 2003, 03:28 PM
#7
Newbie
Thread Starter
Join Date: Mar 2003
Location: Portland, OR
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RA29
Isnt $1000 a bit too much just for tuning a car?
$1000 can get you a lot of stuff
Isnt $1000 a bit too much just for tuning a car?
$1000 can get you a lot of stuff
http://www.vishnutuning.com/xede.htm
Trending Topics
Apr 28, 2003, 04:32 PM
#8
Evolving Member
iTrader: (1)
Join Date: Feb 2003
Location: Kirkland, WA
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
My XEDE should be in this week 
I had them pre-load the Evo stage 0, 92 octane map and a blank (factory default) map. As I understand, I can download future updates from their websites. I'll do a write-up and review once it's installed and have some time to test it on my "butt dyno"...
I had them pre-load the Evo stage 0, 92 octane map and a blank (factory default) map. As I understand, I can download future updates from their websites. I'll do a write-up and review once it's installed and have some time to test it on my "butt dyno"...
Apr 28, 2003, 04:43 PM
#9
Evolving Member
Join Date: Aug 2002
Location: dirty jerzy
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by jman425
My XEDE should be in this week I had them pre-load the Evo stage 0, 92 octane map and a blank (factory default) map. As I understand, I can download future updates from their websites. I'll do a write-up and review once it's installed and have some time to test it on my "butt dyno"...
My XEDE should be in this week
I had them pre-load the Evo stage 0, 92 octane map and a blank (factory default) map. As I understand, I can download future updates from their websites. I'll do a write-up and review once it's installed and have some time to test it on my "butt dyno"...
Apr 28, 2003, 04:51 PM
#10
Evolving Member
iTrader: (1)
Join Date: Feb 2003
Location: Kirkland, WA
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RA29
Isnt $1000 a bit too much just for tuning a car?
$1000 can get you a lot of stuff
Isnt $1000 a bit too much just for tuning a car?
$1000 can get you a lot of stuff
RMR 3" cat-back exhaust - $595
K&N drop in filter - $80
An STi seen from your rear-view mirror - priceless
Apr 28, 2003, 09:34 PM
#11
Evolving Member
Join Date: Apr 2003
Location: Portland, OR
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Jeremy, I am in. What kind of gains could we expect from a totally stock Evo? Have you guys dyno'd any Evo's yet, if so, what sort of baseline? I drive through your area (well close, through the first and Arthur area right past ADP (worked there for a few years)) every day on my way to work. I would be honored to have a Vishnu tuned Evo.
Apr 29, 2003, 08:07 PM
#12
Newbie
Thread Starter
Join Date: Mar 2003
Location: Portland, OR
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by jman425
Vishnu tuning XEDE chip - $795
RMR 3" cat-back exhaust - $595
K&N drop in filter - $80
An STi seen from your rear-view mirror - priceless
Vishnu tuning XEDE chip - $795
RMR 3" cat-back exhaust - $595
K&N drop in filter - $80
An STi seen from your rear-view mirror - priceless
Apr 29, 2003, 08:15 PM
#13
Newbie
Thread Starter
Join Date: Mar 2003
Location: Portland, OR
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by bigd
Jeremy, I am in. What kind of gains could we expect from a totally stock Evo? Have you guys dyno'd any Evo's yet, if so, what sort of baseline? I drive through your area (well close, through the first and Arthur area right past ADP (worked there for a few years)) every day on my way to work. I would be honored to have a Vishnu tuned Evo.
Jeremy, I am in. What kind of gains could we expect from a totally stock Evo? Have you guys dyno'd any Evo's yet, if so, what sort of baseline? I drive through your area (well close, through the first and Arthur area right past ADP (worked there for a few years)) every day on my way to work. I would be honored to have a Vishnu tuned Evo.
Sweet.
You are #6---we have 5 WRX's and 1 EVO now.
I will check with Vishnu to see if they have released any numbers on the gains from the XEDE. I don't see any updates on the site.
We have two local customers who have talked to us about dynoing but they haven't come by yet. I'm anxious to see the numbers on our dyne though.
You're welcome to stop by the shop anytime.
TTYS,
Jeremy
Apr 30, 2003, 02:19 PM
#15
Newbie
Thread Starter
Join Date: Mar 2003
Location: Portland, OR
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ghostrider
Hey Jeremy, whereabouts are you guys located? We're having a big club meet toward the end of May and maybe we can check out your shop.
Hey Jeremy, whereabouts are you guys located? We're having a big club meet toward the end of May and maybe we can check out your shop.
4060 SW Macadam Ave
Portland, OR 97201
We'd love to have you guys here---let me know how we can help.
Best,
Jeremy