is it just me or is there a dent on the muffler

I'm sorry but I'm not a fan of the idle exhaust sound...

i also think i may have a small exhaust leak because i currently have no plate installed at the vband joint. and right now its bascially unmuffled, i think with a plate and some of the exhaust travelling through the muffler it will both quiet it down and mellow the tone down.

i think it definitely sounds better in person but as i said earlier this is with no plate what so ever. traveling through the muffler will probably change the tone down and make it not as raspy. IMO, it sounds much better not through my sisters pos camera. I am probably going to try out some of the plates and see how i like it. I have heard several people say they like the tone better with a plate in it. (minimal performance loss according to edmunds too {thumbup})

there is a small indentation. I believe it happened during install. It really is barely noticeable but the way the light it the exhaust, it really made it stick out.

This video is actually on a camera phone but is a much truer representation of the sound imo. This is a more accurate recording. http://www.youtube.com/watch?v=eIPxu...e=channel_page

Cant see the youtube one and the other one makes it sound bad. Im sure it doesnt though

sounds good, wish I waited.

it really does. Some people are saying they don't like it after listening to the first video, but it doesnt do it justice. I would recommend it. This is one of the several sounds/tones that can be achieved with this exhaust just by changing the plates.

Looks/sounds pretty good.

Could you post another with it 50/50 and 100% muffler?

Thanks for the video review! There are barely any online to watch! I can't wait to get this exhaust.{thumbup}

I haven't tried the fully-open passenger side case, but I can confirm the exhaust sounds nothing like that first video with the small diameter plate installed. It's just a bit louder than stock with a nice idle rumble and a great rev'd-up roar that's not raspy or harsh.

I think I have a bit of an install problem on mine somewhere since I'm getting a weird high-frequency noise (I have a post on the AMS forum asking for help), so I'm going to assume it's not normal for now. Assuming that, if you ignore the weird chirping from this video I made it seems to get the sound down a little better:

http://www.youtube.com/watch?v=ukEa9I0vBEo

Edit: I just realized bwagner is using a test pipe, and mine's bolted to the stock cat, so that will change things pretty significantly.

i can try to get some videos of the different plates when i put them in.

I'd be curious if you hear the same high-frequency noise mine makes with the smallest diameter plate installed.

Thanks! Oh and great exhaust! I'm going to order one very soon.{thumbup}

Bump for new videos!:D