Originally Posted by link62
(Post 7885882)
wideband i say go for aem you can look in the evo for sales their are usually some up for sale on there
and for the others i have prosport gauges so you should look in to them |
i will second on the prosports i helped a buddy install some and they were retard easy with the directions that came with..... and even though i could care less they look way clean....{thumbup}
|
i will second on the prosports i helped a buddy install some and they were retard easy with the directions that came with..... and even though i could care less they look way clean....{thumbup}
|
3 Attachment(s)
ok guys got an update now, just got my downpipe in the mail after waiting a week and a half :( but now its here, I tested it on my megan 02 housing for my turbo. honest to god I didnt think it was going to fit but it did!!! :D
Oh yeah and I got the down pipe for $65.00 I saved a ton!!! here are some pics Attachment 311872 Attachment 311873 http://i13.photobucket.com/albums/a2..._/DSC02836.jpg OH YEAH SAVING MONEY!!! lol Attachment 311874 Hey guys just another thing do I have to modify my evo 8 down pipe so it can fit from the housing to the exhaust connector? and if so what do I need to do? |
Originally Posted by steven121
(Post 7892541)
Hey guys just another thing do I have to modify my evo 8 down pipe so it can fit from the housing to the exhaust connector? and if so what do I need to do? |
Originally Posted by ThunderOZ
(Post 7892710)
Do you mean from the O2 housing to the dp or from the downpipe to the rest of the exhaust?
|
u need to cut just after the flange and extend it about 4-6 inches. so it goes under the motor
|
Originally Posted by Demon_ni2
(Post 7893017)
u need to cut just after the flange and extend it about 4-6 inches. so it goes under the motor
|
From the downpipe to the rest of the exhaust.
|
Originally Posted by ThunderOZ
(Post 7895094)
From the downpipe to the rest of the exhaust.
|
nice lookin build here
|
ok guys I have another question about the ecu. I know I have to use ecu flash but im worried about screwing something up so here are my questions
1.) is it easy to use and download 2.) if I feel like I can't reflash my ecu does someone with the same setup want to do it for me for some cash? 3.) when using the 440 cc injectors and flashing my ecu, my FMU is the flashed ecu correct? I called a place called triworks and he said I need an fmu? so I want to double check before installing my turbo in my car. thanks |
Originally Posted by steven121
(Post 7899134)
ok guys I have another question about the ecu. I know I have to use ecu flash but im worried about screwing something up so here are my questions
1.) is it easy to use and download 2.) if I feel like I can't reflash my ecu does someone with the same setup want to do it for me for some cash? 3.) when using the 440 cc injectors and flashing my ecu, my FMU is the flashed ecu correct? I called a place called triworks and he said I need an fmu? so I want to double check before installing my turbo in my car. thanks |
Originally Posted by crf inc.
(Post 7899700)
you do not need a fmu if your running 440's. your already gonna be running rich just from the 440's so you need to do the ecuflash so that you can tune them down.. 440cc is way too much fuel.. i think we only require about 330cc when running a turbo.. ecuflash is not easy to use.. you have to know what your doing.. but you can download you stock ecu settings from your car and save them to your computer in case you need to switch it back to stock...
ok sounds good, or do you think someone will give me there tuned settings to download onto my ecu to make it easier? I don't know much about tuning but I would like to learn so Im not bothering everyone with these questions. Oh yeah where do you download ecu flash? |
Originally Posted by steven121
(Post 7901074)
ok sounds good, or do you think someone will give me there tuned settings to download onto my ecu to make it easier? I don't know much about tuning but I would like to learn so Im not bothering everyone with these questions. Oh yeah where do you download ecu flash?
heres the site you need to download EcuFlash http://www.openecu.org/index.php?title=EcuFlash best of luck with your build |
All times are GMT -7. The time now is 12:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands