STM's Drag RS Build! Time to go fast.
Congrats to the STM crew on gaining another record your going to have to start a thread just to keep track of them soon lol. I find it really intriguing on how much you guys always try to show the community on how much weight of a car matters. If you look at your old set up you ran 9.37 @152 at about 2700lb with your STM 6766 Turbo Kit and 650 cams. With a stock block/stock engine on a red you ran 9.43 @ 147 at about 2300lbs. Just by removing 400lbs does ALOT it shows and your about 1000lbs off from a stock EVO thts sick. Keep it up STM you guys are always doing great work
There is a lot more to it than that. A lot.
-Em
Very true. The lighter the vehicle, the trickier it can be to get other aspects to get dialed-in as well. The special STM ingredient is their special pixie dust which allows their cars to fly down the track! Congrats Em, keep it up!
-Jamie
-Jamie
We know the car is easily going to go 8s with a T3 setup. Not too hard to figure that out (it will just be lower 8s than the ricer). I would really rather see how far a stock frame can really be pushed. Its something different that hasn't been attempted before. I think that would be more of a challenge for STM than just slapping a 6766 on and seeing how fast it will go. Maybe 8s on a stock frame???