Building AJsGenerX 2011 WW EvoX GSR
Thread Starter
Evolved Member
iTrader: (86)
Joined: Oct 2009
Posts: 1,765
Likes: 12
From: Orange/Rockland, NY
Building AJsGenerX 2011 WW EvoX GSR
Hey Guys, the owner of the car (AJsGenerX) said I should do a thread on his build. I will try and supply more info as I am sure he will also.
We got the block back yesterday and I didn't want the thread to take forever, haha.
MAP Stage 2 Sleeved 2.0, Ported MAP EF4X, Dual Map E85/93.
Wiseco Pistons, Manley TT I beams, GSC S2, Built and Ported Stage 2 head, MAP REV2 Intake Manifold, SSP Catch Can, ACT Streetlite flywheel, Competition Stage 2 clutch.
I'm doing all this in my garage so please excuse the mess,LOL.
Some of you that have seen my Instagram pics have some preview shots already.
Nick















We got the block back yesterday and I didn't want the thread to take forever, haha.
MAP Stage 2 Sleeved 2.0, Ported MAP EF4X, Dual Map E85/93.
Wiseco Pistons, Manley TT I beams, GSC S2, Built and Ported Stage 2 head, MAP REV2 Intake Manifold, SSP Catch Can, ACT Streetlite flywheel, Competition Stage 2 clutch.
I'm doing all this in my garage so please excuse the mess,LOL.
Some of you that have seen my Instagram pics have some preview shots already.
Nick















Last edited by 4RETECH; Mar 17, 2013 at 06:11 PM.
Trending Topics
Alright fellas...mod list is as follows:
1. Stage 2 Sleeved MAP 2.0 Block with Wiseco Pistons and Manley Turbo Tuff I beam Rods
2. Ported Stage 2 head with Supertech dual valve springs, titanium retainers, and Supertech Valves
3. GSC S2 Cams
4. MAP Rev 2 ported Intake Manifold
5. MAP Short Runner Exhaust Manifold
6. MAP EF4 fully ported with anti-surge compressor housing with Turbosmart 23psi wastegate
7. AMS Front Mount Intercooler
8. Cobb Intercooler Pipes
9. Cobb SF Intake, Perrin filter, 3.5 inch Cobb Turbo Inlet Pipe
10. Forge Blow Off Valve
11. Grimmspeed 3 Port Boost Controller
12. AMS Widemouth Downpipe
13. Megan Test Pipe
14. Perrin Stainless Catback
15. AMS Fuel Rail
16. Buschur Double Pumper
17. MAP 2000cc Fuel Injectors
18. SSP Oil Catch Can
19. Prosport Boost and EGT gauge, AEM Failsafe Wideband and Oil Pressure gauge
20. Megan Track Coilovers
21. Perrin Rear Sway Bar
22. Wedsports SA55M 18x10 +18 wheels wrapped in 265/35 Dunlop Direzzas
23. Competition Stage 2 Clutch with ACT Streetlite Flywheel
24. AMS Clutch Master Cylinder
25. E85/93 octane Dual Map Tune
1. Stage 2 Sleeved MAP 2.0 Block with Wiseco Pistons and Manley Turbo Tuff I beam Rods
2. Ported Stage 2 head with Supertech dual valve springs, titanium retainers, and Supertech Valves
3. GSC S2 Cams
4. MAP Rev 2 ported Intake Manifold
5. MAP Short Runner Exhaust Manifold
6. MAP EF4 fully ported with anti-surge compressor housing with Turbosmart 23psi wastegate
7. AMS Front Mount Intercooler
8. Cobb Intercooler Pipes
9. Cobb SF Intake, Perrin filter, 3.5 inch Cobb Turbo Inlet Pipe
10. Forge Blow Off Valve
11. Grimmspeed 3 Port Boost Controller
12. AMS Widemouth Downpipe
13. Megan Test Pipe
14. Perrin Stainless Catback
15. AMS Fuel Rail
16. Buschur Double Pumper
17. MAP 2000cc Fuel Injectors
18. SSP Oil Catch Can
19. Prosport Boost and EGT gauge, AEM Failsafe Wideband and Oil Pressure gauge
20. Megan Track Coilovers
21. Perrin Rear Sway Bar
22. Wedsports SA55M 18x10 +18 wheels wrapped in 265/35 Dunlop Direzzas
23. Competition Stage 2 Clutch with ACT Streetlite Flywheel
24. AMS Clutch Master Cylinder
25. E85/93 octane Dual Map Tune
Last edited by AJsGenerX; Mar 9, 2013 at 05:58 PM.
Thread Starter
Evolved Member
iTrader: (86)
Joined: Oct 2009
Posts: 1,765
Likes: 12
From: Orange/Rockland, NY
Met AJ earlier tonight and got the oil pump.
Oil pump installed and guides.
Ex mani checked for fitment.
Tomorrow I will install cams, timing chain,and then check all valve clearances.
Oil pump installed and guides.
Ex mani checked for fitment.
Tomorrow I will install cams, timing chain,and then check all valve clearances.











