Nitto 2.3L build advice

Reply Subscribe

Thread Tools

Search this Thread

Jan 29, 2018 | 03:51 AM

AntilagtunedMR

Thread Starter

Newbie

Joined: May 2017

Posts: 5

Likes: 0

From: Perth

Nitto 2.3L build advice

Hey guys, I’m after some build advice on my nitto 2.3L evo 8 MR

so the car went in for a new ecu and a tune today because the old one crapped it’s self over time, long story short I got it back with a depressing 360hp on a rolling dyno

my current mods are:
- nitto 2.3l striker kit
- link g4 ecu
-fp black JB turbo
-1000cc injectors
- cosworth 272 cams
- ets 3” intercooler + piping
- pump 98

I’m looking to change my whole set up and go a smaller turbo bigger fuel pump ect,

im after a responsive setup in the 500-550 AWHP mark
take note this is for a weekend worrior/Street car with the occasional track day... and I will be going e85

now that I’ve said all that someone provide me a build list 😂
all help would be appreciated!

Jan 29, 2018 | 11:01 AM

Jonno99

Evolved Member

Joined: Aug 2014

Posts: 1,389

Likes: 70

From: Australia

Before you swap out the turbo, I'd up the size of your injectors to 1450 min, convert to e85 and get a new tuner. I assume you have a good 3inch turbo back and manys. Make sure you have a good fuel pump

Dont give up on the black just yet and dont get hung up on hp, that thing will pump big torque just need to feed it right.

Last edited by Jonno99; Jan 29, 2018 at 12:34 PM.