wish you guys picked up the car.. oh well

parting out, car leaving in two days to go back to the dealer

no reasonable offer refused

FOR THE FOLLOWING I NEED YOUR PARTS TODAY OR TOMORROW LATEST, PM ME YOUR CONTACT IF YOU WANT THEM, I will check my PM at noon and we can arrange to meet at my mechanic.. seriously i need the car back to stock to drop off at the dealer tomorrow afternoon

yellow headlights, $20 for the pair plus i need your stock bulbs

RRM rear sway with the upgraded mounts, $50-$75 plus i need your stock bar and mounts

ES tails, $100 plus your stock tails

[b]the following I will be taking off the car and they will be available friday night at the meet at woodbine and 16[b/]

10 oil filters @ $10 each

3 gauge panel, senders and the modified mounting kit and custom wiring $350

Axis metal brake pads $75

safc ii $250

ingen intake with the aem bypass $250-300

greddy auto timer with HKS harness $100

k&n drop in filter, $40 <-- on hold for friday's meet

-joe

 

ok, most of the parts are off the car.. my local mechanic worked like a mad man

the rear sway bar, yellow head light bulb and the ES tails, if you want to take them, $100 for both PLUS YOUR STOCK PARTS

the ingen intake with the AEM bypass valve, it probably needs a new filter (i just took it off and it was slightly dented) $200-$250

Falken RT615, 205-40-17, 60-65% thread left, $500-$600 (obo) for the four

the gauge panel, senders, modified monting kit and custom wiring, are now neatly packed in a bag.. ready to be installed in a new car :-)

 

Do you still have the radio relocation kit and gauge pannel that fits where the stereo origionally goes?

 

taking it out this morning.. i want to sell the whole setup as a whole (gauges + panel + wiring, etc)

-joe

 

Couple of questions then:

1. How Much are you looking to get?
2. Will this incluse all of the wiring, sending units and possibly instructions to set it up properly?
3. What are the guages I see Oil and I asume one is tempature but what is the third? Air Fuel?? No it doesnt look like an air fuel.
4. They are white faces, what colour do they light up? is is just the numbers and needles that illuminate or are they the ones where the entire face illuminates?


Thanks
Danno

 

1. 300 - 350 (gauges were like $75 + tax a piece * 3)
2. senders are all mounted, you run three wires from the senders back to the gauge panel, one power and one ground to the gauge panel.. the rest is taken off the radio wires
3. oil pressure, oil temp, water temp
4. silver face, lights up red (red LED bulbs) that match the stock color 100%

-joe

 

Hmm thats a little more then I'm willing to spend, thanks anyways.

 

what did you think it would cost to do all that? a fair reasonable offer will not be refused, just don't lowball it (no, $100 won't cut it)

the greddy oil block was like $50 CAD, the greddy water pipe another $40 CAD.. plus misc parts.. it doesn't come cheap

i am still surprrise that i have to give the car back with the RRM rear sway because nobody wanted to give up their stock bar

and the ES tails.. there was tons of demand but no body wants to give up their stocks..

oh well, no skin off my back.. dealer will just end up with them that's all

-joe

 

need to move the rest of the parts

ingen CAI, needs new filter for sure, plus an extra breather tube $200 CAD

safc ii $250 CAD

gauge panel, everything you need, wiring, mounting panel, relocation kit, senders, greddy mounting blocks, etc.. PLUS greddy turbo timer with ignition harness (plug and play) .. turbo timer is stuck to the relocation kit, don't want to seperate.. $350 CAD

axis metal pads (fronts only) plus real Ralliart reservoir socks and real Ralliart 1.3 high performance rad cap, $85

two sets of yellow headlight bulbs, paid $35 x 2, $40 for both sets

OR TAKE IT ALL OF ABOVE FOR $800 CAD, SAVE $125 (200+250+350 + 85 + 40 = 925)

falken RT615, 4 tires, 65% left, $500 OBO

OR TAKE IT ALL OF ABOVE PLUS TIRES FOR $1100 CAD, SAVE $325 (200+250+350 + 85 + 40 +500 = 1425)

-joe

 

bump..

car is gone, the RRM sway bar gone with it (nobody wanted to show up) and the ES tails are gone with it too, so no more PM about those two things please

the rest of the parts are still available

--------------

I am in Markham, Ontario (hwy 7 + woodbine)

prefer local picup, will ship on buyer's expense

can meet half way if you are west side

PM or email, either way is fine

All prices in CAD $

--------------

90% new, almost like new, safc ii $250 CAD

90% new, Greddy auto timer with HKS harness $100

Nokya yellow headlights, 9007, brand new in box, $20 for each pair (i have two pairs)

3 gauge panel, senders and the modified mounting kit and custom wiring $350


Lancer Ralliart Axis metal brake pads $75

Lancer Ralliart Ingen CAI, needs new filter for sure, plus an extra breather tube $200 CAD


Falken RT615, 205-40-17, 60-65% thread left, $500 obo for the four

Dunlop Graspic DS-2 snow tires 195-50-16, 90% thread left, $350 firm

-joe

 

i JUST saw this post or else i would have taken the rear sway from you. damn

 

maybe a noob question... but what is a safc ii and what does it do?

 

dammit!!! would have gotten the sway bar 2... just saw this post today...

 

SAFC ii = Super Air / Fuel Controller version 2.

 

I want that tigger of yours haha seriously
but yah just a quick question with your relocator kit what happens to aftermarket radio will it still fit the cubby hole or wat happens??