Mark this thread as Unsold
FS: Fidanza Flywheel
FS: Fidanza Flywheel
** SOLD **
Used but good condition Fidanza Flywheel for Mitsubishi EVO8/9. Has approx. 15k miles. I replaced my clutch with a twin disc which comes with it's own flywheel. The flywheel surface is still very smooth and does not need to be replaced. There are some dark spots in the picture, but there are no grooves or other issues with the surface. $130 shipped within lower 48 states.
"Fidanza Flywheels are made using the highest quality and most modern materials available. The flywheel itself is made from either 6061 T6 or 2024 T3 aluminum depending on the model. Both of these materials are tempered aluminum which are very, very strong yet very lightweight. The friction surface is very special. Fidanza uses a 1050 high carbon, alloy steel. This alloy is perfect for this use. It is incredibly durable allowing the use of just about any clutch disc material available from organic to Kevlar and even sintered iron. Fidanza attaches the friction surface using aerospace nuts and bolts or 304 stainless steel rivets depending on the application. These are some of the best fasteners money can buy. Fidanza chose them because of their incredible shear strength and resistance to corrosion. All Fidanza ring gears are heat treated for durability. They are heated, pressed on and then secured using grade 10 fasteners. You will not find better materials but keep reading because Fidanza machining and design process will knock your socks off. "
Used but good condition Fidanza Flywheel for Mitsubishi EVO8/9. Has approx. 15k miles. I replaced my clutch with a twin disc which comes with it's own flywheel. The flywheel surface is still very smooth and does not need to be replaced. There are some dark spots in the picture, but there are no grooves or other issues with the surface. $130 shipped within lower 48 states.
"Fidanza Flywheels are made using the highest quality and most modern materials available. The flywheel itself is made from either 6061 T6 or 2024 T3 aluminum depending on the model. Both of these materials are tempered aluminum which are very, very strong yet very lightweight. The friction surface is very special. Fidanza uses a 1050 high carbon, alloy steel. This alloy is perfect for this use. It is incredibly durable allowing the use of just about any clutch disc material available from organic to Kevlar and even sintered iron. Fidanza attaches the friction surface using aerospace nuts and bolts or 304 stainless steel rivets depending on the application. These are some of the best fasteners money can buy. Fidanza chose them because of their incredible shear strength and resistance to corrosion. All Fidanza ring gears are heat treated for durability. They are heated, pressed on and then secured using grade 10 fasteners. You will not find better materials but keep reading because Fidanza machining and design process will knock your socks off. "
Last edited by tribe; Sep 20, 2008 at 08:35 AM. Reason: price update
The part# for the replaceable steel plate is 221001.
I see it listed online for $54:
http://www.horsepowerfreaks.com/part..._Inserts//4644
I see it listed online for $54:
http://www.horsepowerfreaks.com/part..._Inserts//4644