Mark this thread as Unsold
FS/FT: Rexpeed Carbon Fiber Engine Damper
Thread Starter
Evolved Member
iTrader: (34)
Joined: Apr 2008
Posts: 977
Likes: 1
From: LA | New York | Seattle
FS/FT: Rexpeed Carbon Fiber Engine Damper
Hey guys,
I'm selling a MINT condition not even used CF Engine Damper. It was installed on a local member's show car Evo before he sold it to a dealership. It was on the car for maybe 2 weeks and was at 1 show before it was taken off. The piece is immaculate and just like everything else from his car (I bought his sideskirts a while back so I know how well he takes care of his parts).
This piece retails for $165 through Lancershop. I'm asking: SOLD! to Joshs EVO. Thanks bro!
Perfect Weave - Rexpeed ftw!
Installed:
I'm selling a MINT condition not even used CF Engine Damper. It was installed on a local member's show car Evo before he sold it to a dealership. It was on the car for maybe 2 weeks and was at 1 show before it was taken off. The piece is immaculate and just like everything else from his car (I bought his sideskirts a while back so I know how well he takes care of his parts).
This piece retails for $165 through Lancershop. I'm asking: SOLD! to Joshs EVO. Thanks bro!
Perfect Weave - Rexpeed ftw!
Installed:
Last edited by AlvinHuyN; Jan 4, 2009 at 12:20 PM.
Thread Starter
Evolved Member
iTrader: (34)
Joined: Apr 2008
Posts: 977
Likes: 1
From: LA | New York | Seattle
More info on engine dampers:
*Reduce strains on original engine mountings.
*Minimize gear-shift miss during high RPM
*Minimize unnecessary torque lost over full range of RPM
*Overall increase in engine stablility!
*Adjustable stiffness
*Reduces Fuel Comsumption For Normal, Street and Professional Racing Applications
Construction Material:
T6068 Space-craft Aluminium Alloy
Wrapped in Carbon Fiber 1x1 weave
EvoM Review on the Ingalls engine damper, same concept, similar design 
Project Evo: Ingalls Stiffy Review
Author: Ali Allage
Page: 1 Last Updated: 11/8/2005
Engine Torque Damper
With the current power levels on the Project Evo, something had to be done about the drive train lash we were experiencing. The Evo suffers from a good amount of engine movement due to the soft stock motor mounts. Some issues that results from the motor movement are increased stress on exhaust mounts (and motor mounts), problems shifting, and excessive wheel hop.
Upgrading the motor mounts was the only solution I could think of, until I was introduced to the Stiffy from Ingalls Engineering. The Stiffy seemed like the best solution if you didn't want to go through the hassle of installing upgraded motor mounts or inserts. Plus it had the ability to adjust the stiffness level, which is a great feature especially if you drive your Evo daily.
The product arrived at my door within a weeks time. Included in the package was the following:
- Stiffy Engine Torque Damper
- Engine Mounting Bracket
- Chassis Mounting Bracket
- Hardware Kit (includes: two 12mm engine mount nuts, two 12mm washers, two bolts, two nylon locking washers, and two washers.)
Originally Posted by Rexpeed
*Reduce strains on original engine mountings.
*Minimize gear-shift miss during high RPM
*Minimize unnecessary torque lost over full range of RPM
*Overall increase in engine stablility!
*Adjustable stiffness
*Reduces Fuel Comsumption For Normal, Street and Professional Racing Applications
Construction Material:
T6068 Space-craft Aluminium Alloy
Wrapped in Carbon Fiber 1x1 weave
Project Evo: Ingalls Stiffy Review
Author: Ali Allage
Page: 1 Last Updated: 11/8/2005
Engine Torque Damper
With the current power levels on the Project Evo, something had to be done about the drive train lash we were experiencing. The Evo suffers from a good amount of engine movement due to the soft stock motor mounts. Some issues that results from the motor movement are increased stress on exhaust mounts (and motor mounts), problems shifting, and excessive wheel hop.
Upgrading the motor mounts was the only solution I could think of, until I was introduced to the Stiffy from Ingalls Engineering. The Stiffy seemed like the best solution if you didn't want to go through the hassle of installing upgraded motor mounts or inserts. Plus it had the ability to adjust the stiffness level, which is a great feature especially if you drive your Evo daily.
The product arrived at my door within a weeks time. Included in the package was the following:
- Stiffy Engine Torque Damper
- Engine Mounting Bracket
- Chassis Mounting Bracket
- Hardware Kit (includes: two 12mm engine mount nuts, two 12mm washers, two bolts, two nylon locking washers, and two washers.)
Thread Starter
Evolved Member
iTrader: (34)
Joined: Apr 2008
Posts: 977
Likes: 1
From: LA | New York | Seattle
It's a beautiful piece. I just need the money for an ETS UICP more haha 
no anyone who wants a greddy TT, or a rexpeed WW VG, the TT ahs never been installed on my car, and its jsut the UNIT itself no wires or anything included, and the VG was on my car for 2 weeks not even.
Thread Starter
Evolved Member
iTrader: (34)
Joined: Apr 2008
Posts: 977
Likes: 1
From: LA | New York | Seattle
I'll look around on the WW VG for ya. It shouldn't be hard to sell, VG are nice additions to the Evo!
Trending Topics
I just checked my PM's and with your paypal info and I was about to send payment. Thank God I checked the thread b4 sending it...
Thread Starter
Evolved Member
iTrader: (34)
Joined: Apr 2008
Posts: 977
Likes: 1
From: LA | New York | Seattle
Sorry bro I sent everyone a PM stating that it was sold. I must have missed yours. There were 5-6 people wanting it but no one could commit except Josh. No worries, even if you had sent payment I would have issued you a complete refund immediately. Thanks for the interest!
