Mark this thread as Unsold
FS: HKS 272 Mivec for evo ix cheappppp
FS: HKS 272 Mivec for evo ix cheappppp
I have a set of hks 272 cams for a mivec evo ix
Currently in the car, idles almost like stock with plenty of midrange and top end!
You can run these cams on stock valve train
asking price $275 obo shipped! they have roughly about 10-15k on them.
Currently in the car, idles almost like stock with plenty of midrange and top end!
You can run these cams on stock valve train
asking price $275 obo shipped! they have roughly about 10-15k on them.
The intake cam/mivec cam DOES NOT have a hks stamp on it. They do not stamp the hks mivec cams. When I first got them I was very confused at first until I found out. Let me find that thread again, it completly clarified it for me.
Confirmed... HKS MIVEC intake cam does not have a HKS stamp. Call HKS USA if you need to verify. I had the same question after my engine was rebuilt and I was wondering why my HKS intake cam did not have a HKS stamp.
Trending Topics
100% correct. This is because HKS uses a blank Mitsubishi factory core for the intake mivec cam to avoid reliability issues w/ the grind. (other companies have had failures w/ mivec oiling grooves and forging qualities) Therefore, it will look like a factory mivec cam, except HKS always hand engraves letter/number codes. The HKS exhaust cam is the same as the evo8 so its the same part w/ HKS core and engraving. The lift is obvious if you compare it to a stock cam.
