Mark this thread as Unsold
Kelford Mivec 280's & Supertech Springs, Retainers, Seals, OEM 9 BOV
#1
Evolving Member
Thread Starter
iTrader: (5)
Join Date: Aug 2009
Location: Chicago
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Kelford Mivec 280's & Supertech Springs, Retainers, Seals, OEM 9 BOV
**NEW PRICING** If purchased today only!!!!!!!
If cams and springs purchased together this weekend $450 Shipped!
Kelford Mivec 280 Cams lightly used from another forum member. Never installed. Considering selling car therefore these are not needed.
$350 Picked Up
Supertech Dual Springs, Ti Retainers, Seats and Supertech Valve Seals
$275 Picked Up
OEM 9 Diverter Valve Crushed with 17MM Socket on Top. Held 30 PSI fine on my E85 9 Car. Switched it out to an APS twin vent to cure some of the part throttle surging. It will surge a bit - not terrible but noticeable.
$60 Picked Up
If cams and springs purchased together this weekend $450 Shipped!
Kelford Mivec 280 Cams lightly used from another forum member. Never installed. Considering selling car therefore these are not needed.
$350 Picked Up
Supertech Dual Springs, Ti Retainers, Seats and Supertech Valve Seals
$275 Picked Up
OEM 9 Diverter Valve Crushed with 17MM Socket on Top. Held 30 PSI fine on my E85 9 Car. Switched it out to an APS twin vent to cure some of the part throttle surging. It will surge a bit - not terrible but noticeable.
$60 Picked Up
Last edited by asubennett; Jun 27, 2011 at 10:46 AM.
#3
Evolving Member
Thread Starter
iTrader: (5)
Join Date: Aug 2009
Location: Chicago
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
The springs, retainers and seats were purchased from Patrick B on this forum. He had 6K miles of use on them. I purchased brand new supertech valve seals to go with them on my install. I wont be installing them if I sell the car. :-)
So no - not new. But not a lot of use either.
So no - not new. But not a lot of use either.