Lock

 

Bump for awesome turbo setup. I ran the same but on pump gas with hks 272's deep into the 11's. Mine was also the 8 blade version though, your 7-blade version will make more power up top.

 

T3 single scroll manifold into a twin scroll turbo?

 

No, BEP A/R .70 Housing. Is what you would want to run with this turbo.

 

Ah I see... So the turbine housing is an un-needed part?

 

Correct. Buy a BEP .70a/r and toss the one out that's on it.

Scott

 

Yeah the turbo will come with the Original Holset Housing but the route I was going to go was the Bulls Eye Power .70 Housing so it would work with any T3 setup. It bolts right up to the Holset 7 blade.

Just didn't get around to buying the housing (150, 200.00 if you buy brand new)

My bad, should be more clear , I edited

 

Thanks Scott, I appreciate all the info you've given me.

Really bummed to have to sell.

 

I wanted badev0's setup, then he sold it, so I bought a bunch of stuff and now you have yours. I should've been patient. Bump for an awesome setup! I still might get this

 

Dont remind me.. I really dont want to give this up especially since I hunted them both down but responsible me says I must.

 

manifold price

 

Pm'ed.

 

This is a fantastic set up for those of you unfamiliar with the HX-35. The turbo is a beast in the DSM scene and would be even nastier with a properly set up EVO. An easy 500whp is possible with this joker, without question. For those of you interested to buy the .70a/r, here is the link.

http://www.extremepsi.com/store/prod...at=1758&page=1

And now the only thing you need is a suitable downpipe that can be purchased for just over $300.

 

Thank you sir.

 

random question along with a free bump for you; which turbo equivalent to a hx40 would work on an evo?