Mark this thread as Unsold
Iowa Randomness... For Sale 4g64 cranks fuel etc..
#1
Iowa Randomness... For Sale 4g64 cranks fuel etc..
Hey Guys I have a lot of Random stuff to clear out of my garage and into your car, Shoot me a pm for purchases, my paypal is bfeauto187@yahoo.com all prices do not include paypal fees or shipping unless I say otherwise. Thanks for lookin!
I also have OEM Pistons rods and head parts/head studs sitting in a box if someone is interested shoot me a pm with offers
03 OEM intake mani and stock Throttle Body (new aperature shaft seals) Great for sending to MAP for a port and no down time!
$200
![](https://sphotos-b.xx.fbcdn.net/hphotos-ash3/s720x720/531746_3900672549258_1258110199_n.jpg)
4g64 Block SOLD(Good Line Bore) pistons are standard size and scuffed will need to be .020 over when you build it.
100mm SOLD and 88mm Cranks Both Mains need polished/cut Rods are all Good
$Make offer!
![](https://sphotos-a.xx.fbcdn.net/hphotos-ash3/s720x720/599294_3900671109222_1269338299_n.jpg)
ARP head studs 2 sets both Torqued one time at 90 ft lbs
$60
![](https://sphotos-a.xx.fbcdn.net/hphotos-snc7/s720x720/409750_3900670949218_1451708090_n.jpg)
GM 3" MAF with Maf Translator, I used it on my Stock ECU evo 8 @ 670HP The maftranslator is in a radioshack waterproof box it comes with a lid.
![](https://sphotos-b.xx.fbcdn.net/hphotos-ash3/s720x720/531464_3900672709262_166332081_n.jpg)
Full Blown Double pumper SOLD
AFI anodized aluminum fuel rail -6 feed.
$75 shipped and paypal'd
![](https://sphotos-a.xx.fbcdn.net/hphotos-ash3/s720x720/555497_3900673189274_232518066_n.jpg)
MAP Stage 3 head for an evo 8, have the invoice for all the parts/labor, it has SI valves (std size) Supertech Dual Springs ferra guides and seals and GSC S2 274 cams Fidanza Gears SOLD
![](https://sphotos-a.xx.fbcdn.net/hphotos-snc7/600097_3900674029295_437820763_n.jpg)
Diff a lil surface rust gears are flawless
$Make offer
![](https://sphotos-a.xx.fbcdn.net/hphotos-prn1/s720x720/531477_3900673629285_1072525052_n.jpg)
03 output shafts (both sides) Short Pass side SOLD
$Make offer
I also have OEM Pistons rods and head parts/head studs sitting in a box if someone is interested shoot me a pm with offers
03 OEM intake mani and stock Throttle Body (new aperature shaft seals) Great for sending to MAP for a port and no down time!
$200
![](https://sphotos-b.xx.fbcdn.net/hphotos-ash3/s720x720/531746_3900672549258_1258110199_n.jpg)
4g64 Block SOLD(Good Line Bore) pistons are standard size and scuffed will need to be .020 over when you build it.
100mm SOLD and 88mm Cranks Both Mains need polished/cut Rods are all Good
$Make offer!
![](https://sphotos-a.xx.fbcdn.net/hphotos-ash3/s720x720/599294_3900671109222_1269338299_n.jpg)
ARP head studs 2 sets both Torqued one time at 90 ft lbs
$60
![](https://sphotos-a.xx.fbcdn.net/hphotos-snc7/s720x720/409750_3900670949218_1451708090_n.jpg)
GM 3" MAF with Maf Translator, I used it on my Stock ECU evo 8 @ 670HP The maftranslator is in a radioshack waterproof box it comes with a lid.
![](https://sphotos-b.xx.fbcdn.net/hphotos-ash3/s720x720/531464_3900672709262_166332081_n.jpg)
Full Blown Double pumper SOLD
AFI anodized aluminum fuel rail -6 feed.
$75 shipped and paypal'd
![](https://sphotos-a.xx.fbcdn.net/hphotos-ash3/s720x720/555497_3900673189274_232518066_n.jpg)
MAP Stage 3 head for an evo 8, have the invoice for all the parts/labor, it has SI valves (std size) Supertech Dual Springs ferra guides and seals and GSC S2 274 cams Fidanza Gears SOLD
![](https://sphotos-a.xx.fbcdn.net/hphotos-snc7/600097_3900674029295_437820763_n.jpg)
Diff a lil surface rust gears are flawless
$Make offer
![](https://sphotos-a.xx.fbcdn.net/hphotos-prn1/s720x720/531477_3900673629285_1072525052_n.jpg)
03 output shafts (both sides) Short Pass side SOLD
$Make offer
![](https://sphotos-a.xx.fbcdn.net/hphotos-ash3/524554_3900673349278_2003182485_n.jpg)
Last edited by feautoevo; Sep 26, 2012 at 08:29 AM. Reason: parts sold