Mark this thread as Unsold
i have a evo 8 curt brown head. fresh never ran. text me for pics
Comes with stock valves
New super tech bronze guides
No springs,lifters,or rockers.
$1100
517-803-9018
Comes with stock valves
New super tech bronze guides
No springs,lifters,or rockers.
$1100
517-803-9018
Evolved Member
Quote:
I'm sure they can be for another $550 Originally Posted by evo8vz
cams included?
Evolving Member
How many time has this head been decked?
Do you have the measurement of how much it has been decked?
Too much decking the head will cause the valve to hit the top of the Pistons.
Getting a thicker HG is not good because it won't hold a lot of engine pressure.
Do you have the measurement of how much it has been decked?
Too much decking the head will cause the valve to hit the top of the Pistons.
Getting a thicker HG is not good because it won't hold a lot of engine pressure.
Evolved Member
Quote:
Do you have the measurement of how much it has been decked?
Too much decking the head will cause the valve to hit the top of the Pistons.
Getting a thicker HG is not good because it won't hold a lot of engine pressure.
Curt Brown wouldn't have touched this head if the deck was to low, I know. He doesn't like to waste his time nor the customers.Originally Posted by Howulikemyevo
How many time has this head been decked?Do you have the measurement of how much it has been decked?
Too much decking the head will cause the valve to hit the top of the Pistons.
Getting a thicker HG is not good because it won't hold a lot of engine pressure.
Newbie
Quote:
I can second that !!! Curt tells you everything (problems etc if any) before he does anything to the head.Originally Posted by Migsubishi
Curt Brown wouldn't have touched this head if the deck was to low, I know. He doesn't like to waste his time nor the customers.
Newbie
Curt is a friend of mine very stand up guy, anything he touches is meticulous. I wound not hesitate to get this head if anyone has any hangups
LetsGetThisDone
EvoM Guru
close
May 30, 2026
- Join DateOct 2013
- LocationLas Vegas
- Posts:15,973
-
iTrader Positive Feedback100
-
iTrader Feedback Score(1)
-
Likes:162
-
Liked:1,629 Times in 1,392 Posts
Are the valves marked for which port they go into?
The valves were not marked when it was disassembled.
I contacted CB and this was his reply.
That was 131 heads ago! We never take more than a couple of thousands off a head, all heads are the same as far as specs, sorry no official paperwork
Sent from my iPhone
On May 11, 2016, at 1:04 PM, dish0987@yahoo.com wrote:
Hello, my name is Dillon and I bought a head that was done by you. I was wondering if you could send me a invoice or receipt detailing what work was done on this head. Also any other information about this head like if it was decked would be very helpful. I am selling the head on evom and people have been Asking for an invoice or receipt. I figured I would ask you before sending everyone to you for questions.
Thank you
Dillon
<image1.JPG>
<image2.JPG>
Sent from my iPhone
I contacted CB and this was his reply.
That was 131 heads ago! We never take more than a couple of thousands off a head, all heads are the same as far as specs, sorry no official paperwork
Sent from my iPhone
On May 11, 2016, at 1:04 PM, dish0987@yahoo.com wrote:
Hello, my name is Dillon and I bought a head that was done by you. I was wondering if you could send me a invoice or receipt detailing what work was done on this head. Also any other information about this head like if it was decked would be very helpful. I am selling the head on evom and people have been Asking for an invoice or receipt. I figured I would ask you before sending everyone to you for questions.
Thank you
Dillon
<image1.JPG>
<image2.JPG>
Sent from my iPhone