Mark this thread as Unsold
FS[MidWest]: curt brown head
Apr 30, 2016, 09:26 AM
#1
Newbie
Thread Starter
Join Date: Apr 2015
Location: Midwest
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
curt brown head
i have a evo 8 curt brown head. fresh never ran. text me for pics
Comes with stock valves
New super tech bronze guides
No springs,lifters,or rockers.
$1100
517-803-9018
Comes with stock valves
New super tech bronze guides
No springs,lifters,or rockers.
$1100
517-803-9018
Last edited by Dshen; May 10, 2016 at 11:14 AM.
May 10, 2016, 11:58 AM
#7
How many time has this head been decked?
Do you have the measurement of how much it has been decked?
Too much decking the head will cause the valve to hit the top of the Pistons.
Getting a thicker HG is not good because it won't hold a lot of engine pressure.
Do you have the measurement of how much it has been decked?
Too much decking the head will cause the valve to hit the top of the Pistons.
Getting a thicker HG is not good because it won't hold a lot of engine pressure.
Trending Topics
May 11, 2016, 09:49 AM
#11
EvoM Guru
iTrader: (1)
Are the valves marked for which port they go into?
May 14, 2016, 09:59 AM
#12
Newbie
Thread Starter
Join Date: Apr 2015
Location: Midwest
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
The valves were not marked when it was disassembled.
I contacted CB and this was his reply.
That was 131 heads ago! We never take more than a couple of thousands off a head, all heads are the same as far as specs, sorry no official paperwork
Sent from my iPhone
On May 11, 2016, at 1:04 PM, dish0987@yahoo.com wrote:
Hello, my name is Dillon and I bought a head that was done by you. I was wondering if you could send me a invoice or receipt detailing what work was done on this head. Also any other information about this head like if it was decked would be very helpful. I am selling the head on evom and people have been Asking for an invoice or receipt. I figured I would ask you before sending everyone to you for questions.
Thank you
Dillon
<image1.JPG>
<image2.JPG>
Sent from my iPhone
I contacted CB and this was his reply.
That was 131 heads ago! We never take more than a couple of thousands off a head, all heads are the same as far as specs, sorry no official paperwork
Sent from my iPhone
On May 11, 2016, at 1:04 PM, dish0987@yahoo.com wrote:
Hello, my name is Dillon and I bought a head that was done by you. I was wondering if you could send me a invoice or receipt detailing what work was done on this head. Also any other information about this head like if it was decked would be very helpful. I am selling the head on evom and people have been Asking for an invoice or receipt. I figured I would ask you before sending everyone to you for questions.
Thank you
Dillon
<image1.JPG>
<image2.JPG>
Sent from my iPhone
Thread
Thread Starter
Forum
Replies
Last Post
N33d4sp33d
For Sale/WTB - Engine / Drivetrain / Power
15
Oct 7, 2013 04:15 PM
tscompusa
Evo Dyno Tuning / Results
18
Jul 19, 2013 04:22 AM
240Z TwinTurbo
Evo Dyno Tuning / Results
35
Feb 19, 2012 08:12 AM
BigT
For Sale/WTB - Engine / Drivetrain / Power
39
Jan 17, 2012 10:36 AM