Has anyone installed the driven fab v3 on their evo x?

 

I have it, absolutely love it. I'm actually impressed with how much **** it collects

 

Was it an easy install?how did you do it?

 

The install was really easy, took me 10 minutes. The hardest part was reaching the bolt underneath the can.

Heres the write up for the install.

 

I got that installation but I'm just confused on the driver side breather like where do I put the plug on because I know one goes on the intake manifold but where does the other goes to?

 

So you know both hoses go from the valve cover to the catch can? Normally it goes Valve Cover -> Intake Manifold and Valve Cover -> Intake. So the little rubber plug goes on the intake manifold and the other on the intake.

 

Can you send me a pic to the intake one?

 

This is on an ETS intake, but its the same concept. You just need to put the rubber plug on the adapter on the intake pipe.

 

[QUOTE=jakgal04;11633466]This is on an ETS intake, but its the same concept. You just need to put the rubber plug on the adapter on the intake pipe.



ok I know where it is exactly now thanks for the help
But before you took out the reservoir out did you pump the coolant out? Since the kit comes with the pump

 

I didn't pump it out, I actually still have the reservoir on my shelf with coolant still in it lol

 

But you added coolant after the install in the radiator?

 

I checked, but didn't have to. Keep in mind that reservoir is just an expansion tank so it rises and sinks when the car is hot/cold.

 

So coolant should just flow into the expansion tank by its self?

 

Yup thats correct. You'll see once you install it theres no way to put coolant in it anyway

 

Ok good to know
So how every how long are you suppose to pump out the what's in the expansion tank?