Next Big Thing - Forsyth, GA - ETS and Forged build!
Next Big Thing - Forsyth, GA - ETS and Forged build!
Here are a couple pics of my stage 2 build that is almost complete. I still have to get retuned for race gas and higher boost. Forged Performance in Marrietta, GA did most of the work. HiFi Buys (when it was in Macon) did the trunk and most audio. Alexlewand on here did the center console and armrest work (awesome job!). Thanks to all those who have helped so far!
On wastegate pressure (14psi) I am at 330 to the wheels on a Dyno Dynamics load-based chassis dyno. At 24psi I was at 415. I am breaking it in at the 14psi for another 2000 miles, and will prob go to 25-26 psi fully tuned on 93, 30 somethin on race.
Mods that i can think of -
ETS fully polished 61mm turbo kit
ETS fully polished intercooler and piping
ETS fully polished radiator line and intake
ETS DP
Exedy dual carbon clutch
Walbro 255
HKS 272 cams
HKS cam Gears
Perrin Fuel Rail
RC 1000cc injectors
Eagle 2.3 stroker
AMS race Balance Elim. kit
Bushur Exhaust
Bushur oil dipstick spring
Vibrant Vaccume distrib. block
Apexi AVCR
Apexi Turbo Timer
AEM EMS and UEGO
Defi gauges and control unit
ARC Radiator shroud
ARC Engine cover
Tanabe Sustec 7 coilovers
Volk 18x9.5 LE RE30 w/ front 5mm spacer
Yokohama S-drive 255/45?? tires
180 amp Dominick Iraggi Alternator
JL Audio 12w6 (2)
JL Audio 500/1 (2)
JL Audio 300/4
Alpine IDVA300?
Boston Accoustic 620?
Monster wiring
Monster Capister
Amps, etc mounted on Plexi w/ Neon
) in the trunk which is fully fiberglassed one piece and painted to match
what do u think?? Next is paint and body, meth, and head work...











4 of my 5 babies...the wife was at work
)

let me know what you think!
mike
On wastegate pressure (14psi) I am at 330 to the wheels on a Dyno Dynamics load-based chassis dyno. At 24psi I was at 415. I am breaking it in at the 14psi for another 2000 miles, and will prob go to 25-26 psi fully tuned on 93, 30 somethin on race.
Mods that i can think of -
ETS fully polished 61mm turbo kit
ETS fully polished intercooler and piping
ETS fully polished radiator line and intake
ETS DP
Exedy dual carbon clutch
Walbro 255
HKS 272 cams
HKS cam Gears
Perrin Fuel Rail
RC 1000cc injectors
Eagle 2.3 stroker
AMS race Balance Elim. kit
Bushur Exhaust
Bushur oil dipstick spring
Vibrant Vaccume distrib. block
Apexi AVCR
Apexi Turbo Timer
AEM EMS and UEGO
Defi gauges and control unit
ARC Radiator shroud
ARC Engine cover
Tanabe Sustec 7 coilovers
Volk 18x9.5 LE RE30 w/ front 5mm spacer
Yokohama S-drive 255/45?? tires
180 amp Dominick Iraggi Alternator
JL Audio 12w6 (2)
JL Audio 500/1 (2)
JL Audio 300/4
Alpine IDVA300?
Boston Accoustic 620?
Monster wiring
Monster Capister
Amps, etc mounted on Plexi w/ Neon
) in the trunk which is fully fiberglassed one piece and painted to matchwhat do u think?? Next is paint and body, meth, and head work...











4 of my 5 babies...the wife was at work
)
let me know what you think!
mike



I live in Duluth,GA 