STAGE 1 is STOCK or INTAKE

Stage 2 is:

 

Are there any Stage 2 for a '11 MR with stock intake and TBE?

 

How about some love for GSR? Any plans for stage 1 + cosworth panel filter?

Thanks !

 

you can use the Stage1 map with a Cosworth panel filter

 

hey BakaUnchi

if I have password JDM intake, which map is closer to use, for stage 2 ? I probably will get an etune or custom tune ... but until then I got to use something.

thx

 

uses the stock maf housing right?

 

hi BakaUnchi

it's Aluminum MAF Housing with Integrated Velocity Stack

according to:
http://passwordjdm.com/PasswordJDM-D...4737C1931.aspx

thx

 

do me a favor and install a STOCK INTAKE stage 1 map and log it for me for 20 min on the highway

 

Hi BakaUnchi,

I'll let you know as soon as I get it installed.

I'll get the intake installed first, then exhaust system., both will get log ....


thx.

 

do you have any dyno graphs for your stage 2 maps i havnt spotted any?

 

Hi BakaUnchi,

I have a Stage 2 setup with Cobb SF intake - 2011 EVO MR.
Any suggestions on map use?

Cheers

 

use the normal stage 2 map or the cosworth map

 

im looking for valet and anti-theft map for my 2011 gsr..... also is there anyway to monitor with cobb on stock tune? looks like i have to install ap for stock tune then theres no monitoring option.

 

So, for 2011 MR with stock intake, I can use "2011 MR Cosworth Stage 2 93.ptm"?

 

not if you want the car to run right
the cosworth filters require a LOT of fuel up top
the injen would be more close to what you need, i have some more tweaks to the stage 2 mapping to make before i release the stock intake one

hold on for a week or so