Corner balance in NC, alignment shop recommendations
#1
Evolved Member
Thread Starter
iTrader: (4)
Join Date: Feb 2011
Location: Raleigh, NC
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Corner balance in NC, alignment shop recommendations
Hey guys,
Just picked up my Evo and I'm in the process of making it a little more street-friendly. Looking for as local to Raleigh as possible. I went to apex vintage's website, and they are real close to where I live, but I want to hear other options (or feedback on apex!).
I need my ride-height adjusted on my coilovers, along with my alignment changed back to a street orientation. I can adjust my own ride height, but I'll need an alignment anyway so may as well let them do it.
Anyone have someone they recommend that has familiarity with race and street setups?
Also, my car is running a lot of neg camber, so I may be looking at fender rolling. The car is immaculate and it is BLACK. So any recommendation here?
Just picked up my Evo and I'm in the process of making it a little more street-friendly. Looking for as local to Raleigh as possible. I went to apex vintage's website, and they are real close to where I live, but I want to hear other options (or feedback on apex!).
I need my ride-height adjusted on my coilovers, along with my alignment changed back to a street orientation. I can adjust my own ride height, but I'll need an alignment anyway so may as well let them do it.
Anyone have someone they recommend that has familiarity with race and street setups?
Also, my car is running a lot of neg camber, so I may be looking at fender rolling. The car is immaculate and it is BLACK. So any recommendation here?
#2
Evolved Member
Thread Starter
iTrader: (4)
Join Date: Feb 2011
Location: Raleigh, NC
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
I may have answered my own question after some research.
I'm going to talk to these guys:
Performance Chassis
Anyone have any experience with them?
I'm going to talk to these guys:
Performance Chassis
Anyone have any experience with them?
#3
Performance Chassis is a good shop for what you are trying to do. I get my alignments done there, and they always ask if I want a race setup, street setup, how much camber/toe etc. The guys who run the shop also race, so they know what they're doing.
Jim (jplgsx) in the Raleigh forum used to work there, and could probably offer more insight into their full line of services.
Also, check the Raleigh forum for local meets...
Congrats on the Evo!
-Mike
Jim (jplgsx) in the Raleigh forum used to work there, and could probably offer more insight into their full line of services.
Also, check the Raleigh forum for local meets...
Congrats on the Evo!
-Mike
#4
Evolved Member
iTrader: (102)
Jim (jplgsx) is a guru when it comes to suspension and chassi stuff around here. pm him and he should be able to help u out.
+1
Performance Chassis is a good shop for what you are trying to do. I get my alignments done there, and they always ask if I want a race setup, street setup, how much camber/toe etc. The guys who run the shop also race, so they know what they're doing.
Jim (jplgsx) in the Raleigh forum used to work there, and could probably offer more insight into their full line of services.
Also, check the Raleigh forum for local meets...
Congrats on the Evo!
-Mike
Jim (jplgsx) in the Raleigh forum used to work there, and could probably offer more insight into their full line of services.
Also, check the Raleigh forum for local meets...
Congrats on the Evo!
-Mike
#6
Evolved Member
Thread Starter
iTrader: (4)
Join Date: Feb 2011
Location: Raleigh, NC
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the recommendation confirmation.
I talked to a friend at work and he said that pretty much everyone in NCEuro takes their stuff to PC also. He recommended them before I had a chance to ask him. He also mentioned that PC was good at fender-rolling, so I'll see if I can see a few examples of their work on that in case I need it.
I called Monica so I think I'll take it over this week. I'll definitely be at the upcoming Raleigh meets!
Thanks again!
I talked to a friend at work and he said that pretty much everyone in NCEuro takes their stuff to PC also. He recommended them before I had a chance to ask him. He also mentioned that PC was good at fender-rolling, so I'll see if I can see a few examples of their work on that in case I need it.
I called Monica so I think I'll take it over this week. I'll definitely be at the upcoming Raleigh meets!
Thanks again!
Thread
Thread Starter
Forum
Replies
Last Post
TxFAkuma
Evo X General
4
Feb 17, 2017 03:45 PM
helios-73
Evo Tires / Wheels / Brakes / Suspension
3
Jan 13, 2016 10:40 PM
Vivid Racing
Evo 'For Sale' Suspension / Brakes / Handling
4
May 13, 2005 09:45 AM