Notices

RallArt Turbo in a Lancer

Thread Tools
 
Search this Thread
 
Old Jul 28, 2009 | 12:00 PM
  #1  
Hydrolikz's Avatar
Thread Starter
Evolved Member
 
Joined: Jul 2007
Posts: 802
Likes: 0
From: ¯\(º_o)/¯
RallArt Turbo in a Lancer

I was always wondering about using Evo X or RalliArt parts in the Lancer, and now i've seen a few guys have done it but are reluctant to release what they did to tune or minor major issues that may/have occured. So if anyone know what it would take to have this accomplished please let me know!

Here's a vid of an 09 Lancer putting down 255whp-250wtq using a RalliArt Turbo & Manifold http://www.youtube.com/watch?v=PcueEUfWjVs

And here's a vid of a Turbo'd CVT done by speedlab in Manila putting down 181 WHP @ only 7psi (as per owners request) and it only costed him $2400, much less than RRM's and Xtremeboost's kits. (And no it's not an Evo, just an Evo body-kit) http://www.youtube.com/watch?v=NffSlmXpSSg

Just listen to the blow-off @ 53 seconds, I hear it's madd compression surge but it sounds SYC! http://www.youtube.com/watch?v=8f3UBBw5hes

Turbo CVT!
Reply
Old Jul 28, 2009 | 12:19 PM
  #2  
xed32's Avatar
Newbie
 
Joined: Dec 2007
Posts: 72
Likes: 0
From: Toronto, Canada
Those Puerto Rican guys aint playin wid the Lancers at all. Serious work going on down there.
Reply
Old Jul 28, 2009 | 01:35 PM
  #3  
Slyy's Avatar
Evolving Member
iTrader: (2)
 
Joined: Sep 2008
Posts: 434
Likes: 0
From: Toronto
Originally Posted by Hydrolikz
I was always wondering about using Evo X or RalliArt parts in the Lancer, and now i've seen a few guys have done it but are reluctant to release what they did to tune or minor major issues that may/have occured. So if anyone know what it would take to have this accomplished please let me know!

Here's a vid of an 09 Lancer putting down 255whp-250wtq using a RalliArt Turbo & Manifold http://www.youtube.com/watch?v=PcueEUfWjVs

And here's a vid of a Turbo'd CVT done by speedlab in Manila putting down 181 WHP @ only 7psi (as per owners request) and it only costed him $2400, much less than RRM's and Xtremeboost's kits. (And no it's not an Evo, just an Evo body-kit) http://www.youtube.com/watch?v=NffSlmXpSSg

Just listen to the blow-off @ 53 seconds, I hear it's madd compression surge but it sounds SYC! http://www.youtube.com/watch?v=8f3UBBw5hes

Turbo CVT!


You could use the EVO X parts and ralliart parts for the turbo; but the only thing you'll need is to tune the ECU. Now that will be the complicated part. There's a guy i know using the evo x and ralliart parts.

I've known about that CVT turbo kit from the Philippines for a while now and its awesome! I've spoken to the company and to the owner; but the downside to it is that speed lab won't ship overseas.

They didn't give me an explanation and said that i'm better off buying the kit from RRM. They said that most of the parts they use in the turbo come from the US. Piping, couplings etc.
They're kit only cost $2,000 - $2,400 US. If you calculate the shipping and the bit, it should still be way cheaper than other kits in the US.


Anyways, i got some pictures of the Turbo CVT.
The owner is from Philippines Manila.
He said he had to the EVOX kit because the GTS kit didn't look right with the front Intercooler.



















***EDIT****

I just heard that speed lab might be mass producing this product because of all the interest that they've had overseas.

Sounds good for us all!

Last edited by Slyy; Jul 28, 2009 at 01:41 PM.
Reply
Old Jul 28, 2009 | 03:35 PM
  #4  
Hydrolikz's Avatar
Thread Starter
Evolved Member
 
Joined: Jul 2007
Posts: 802
Likes: 0
From: ¯\(º_o)/¯
Originally Posted by Slyy
There's a guy i know using the evo x and ralliart parts.

Really? His car is Turbo'd?




***EDIT****

I just heard that speed lab might be mass producing this product because of all the interest that they've had overseas.

Sounds good for us all!
I just saw that as well, they really should lots of $$$ in it for them if they do.
Reply
Old Jul 28, 2009 | 03:43 PM
  #5  
val789's Avatar
Newbie
 
Joined: Jun 2009
Posts: 0
Likes: 0
From: Canada
i've seen the ved. 100% pinoy.! if you need a translator let me know.. LOL
Reply
Old Jul 28, 2009 | 04:02 PM
  #6  
Hydrolikz's Avatar
Thread Starter
Evolved Member
 
Joined: Jul 2007
Posts: 802
Likes: 0
From: ¯\(º_o)/¯
I found a guy selling pretty much all you need for a Turbo-kit minus piggy-back or tuning software, he's looking for $1100 which IMO is a f'n good deal since installation shouldn't run you more than $2000 which would bring it into the RRM Xtremeboost price range. I would buy it if it was RalliArt parts because im CVT and can't go for massive power upgrades, but you 5spd guys might be interested in this. (I know I would be) If anyone wants it or more info let me know and i'll pass it on.
Reply
Old Jul 28, 2009 | 04:06 PM
  #7  
stitchflip's Avatar
Newbie
 
Joined: Mar 2009
Posts: 13
Likes: 0
From: is in between your momma's vaj..lmao
dang! I should give those guys a call! lol
Reply
Old Jul 28, 2009 | 06:11 PM
  #8  
turbotime's Avatar
Account Disabled
iTrader: (16)
 
Joined: Jan 2008
Posts: 635
Likes: 1
From: Ontario Canada
I spoke with infamous about this. You can pretty well build yourself a turbo kit for $1500 or less not including tuning. If anyone needs help with install I can do it no problem.

Hydrolikz, what are the details on this kit for $1100? sounds like a deal to be had.

ALSO anyone know where or what front bumper side skirts and rear bumper these are?

Reply
Old Jul 28, 2009 | 06:20 PM
  #9  
Infamous_pt4's Avatar
Evolving Member
 
Joined: Nov 2007
Posts: 273
Likes: 0
From: Canadia
^ thats prolly one a those bodykits.com kits


so you can do a turbo kit install?
Reply
Old Jul 28, 2009 | 07:31 PM
  #10  
turbotime's Avatar
Account Disabled
iTrader: (16)
 
Joined: Jan 2008
Posts: 635
Likes: 1
From: Ontario Canada
yes, its no big deal compared to the working on my 03. I cant do the tuning but I can see about getting it done for a good price.
Reply
Old Jul 28, 2009 | 07:34 PM
  #11  
Infamous_pt4's Avatar
Evolving Member
 
Joined: Nov 2007
Posts: 273
Likes: 0
From: Canadia
Originally Posted by turbotime
yes, its no big deal compared to the working on my 03. I cant do the tuning but I can see about getting it done for a good price.
im thinking maybe a winter project , i want to get into more details with you about this
Reply
Old Jul 28, 2009 | 07:36 PM
  #12  
turbotime's Avatar
Account Disabled
iTrader: (16)
 
Joined: Jan 2008
Posts: 635
Likes: 1
From: Ontario Canada
will chat tomorrow... I'm interested to hear what hydrolikz is talking about. Maybe a good option
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CokeZero
Lancer Troubleshooting
5
Jun 17, 2017 08:48 PM
Capper77
Evo General
4
Sep 13, 2016 12:52 PM
Slomo Corey
Evo Dyno Tuning / Results
24
Jun 14, 2012 06:18 PM
mitsuboost30
Northeast Region
11
Apr 9, 2008 07:24 PM




All times are GMT -7. The time now is 12:45 PM.