TTP-Engineering's HIAG 2400cc injectors!
Oct 27, 2009, 11:16 AM
#1
TTP-Engineering's HIAG 2400cc injectors!
TTP-Engineering is proud to release our HIAG 2400cc injectors for Evo 8-9 and X!
With limited flow rates on standard injectors and low load hiccups plaguing the industry with regards to running larger sized injectors we are proud to be able to bring another option to the table with regards to a ultra high flowing injector able to support 1200hp.
With these high impedance injectors the hiccups of the past should be eliminated and driveability should be much improved all the while being able to support gasoline and ethanol content to 100%. These are not recommended for VP Import or C16 as the seals can swell, reducing efficiency, however gasoline and ethanol are supported.
Injector sets are flow matched to within 0.48% of each other to insure precision fueling for each cylinder.
Questions and install instructions are available by email sales@ ttp-engineering.com.
Thanks for looking!
TTP
Oct 27, 2009, 11:36 AM
#3
Last edited by TTP Engineering; Oct 27, 2009 at 11:42 AM.
Oct 27, 2009, 02:43 PM
#5
Pricing is on our site here:
http://ttp-engineering.com/catalog/p...roducts_id=437
http://ttp-engineering.com/catalog/p...roducts_id=437
Trending Topics
Nov 17, 2009, 01:26 PM
#13
Account Disabled
iTrader: (4)
Join Date: May 2008
Location: Orlando, FL
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
PM for pricing and details. Call me directly for appointments!! Thanks!!
TTP-Engineering is proud to release our HIAG 2400cc injectors for Evo 8-9 and X!
With limited flow rates on standard injectors and low load hiccups plaguing the industry with regards to running larger sized injectors we are proud to be able to bring another option to the table with regards to a ultra high flowing injector able to support 1200hp.
With these high impedance injectors the hiccups of the past should be eliminated and driveability should be much improved all the while being able to support gasoline and ethanol content to 100%. These are not recommended for VP Import or C16 as the seals can swell, reducing efficiency, however gasoline and ethanol are supported.
Injector sets are flow matched to within 0.48% of each other to insure precision fueling for each cylinder.
Questions and install instructions are available by email sales@ ttp-engineering.com.
Thanks for looking!
TTP
TTP-Engineering is proud to release our HIAG 2400cc injectors for Evo 8-9 and X!
With limited flow rates on standard injectors and low load hiccups plaguing the industry with regards to running larger sized injectors we are proud to be able to bring another option to the table with regards to a ultra high flowing injector able to support 1200hp.
With these high impedance injectors the hiccups of the past should be eliminated and driveability should be much improved all the while being able to support gasoline and ethanol content to 100%. These are not recommended for VP Import or C16 as the seals can swell, reducing efficiency, however gasoline and ethanol are supported.
Injector sets are flow matched to within 0.48% of each other to insure precision fueling for each cylinder.
Questions and install instructions are available by email sales@ ttp-engineering.com.
Thanks for looking!
TTP
Dec 1, 2009, 12:29 PM
#15
Account Disabled
iTrader: (4)
Join Date: May 2008
Location: Orlando, FL
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
PM for pricing and details, Thanks!!
TTP-Engineering is proud to release our HIAG 2400cc injectors for Evo 8-9 and X!
With limited flow rates on standard injectors and low load hiccups plaguing the industry with regards to running larger sized injectors we are proud to be able to bring another option to the table with regards to a ultra high flowing injector able to support 1200hp.
With these high impedance injectors the hiccups of the past should be eliminated and driveability should be much improved all the while being able to support gasoline and ethanol content to 100%. These are not recommended for VP Import or C16 as the seals can swell, reducing efficiency, however gasoline and ethanol are supported.
Injector sets are flow matched to within 0.48% of each other to insure precision fueling for each cylinder.
Questions and install instructions are available by email sales@ ttp-engineering.com.
Thanks for looking!
TTP
TTP-Engineering is proud to release our HIAG 2400cc injectors for Evo 8-9 and X!
With limited flow rates on standard injectors and low load hiccups plaguing the industry with regards to running larger sized injectors we are proud to be able to bring another option to the table with regards to a ultra high flowing injector able to support 1200hp.
With these high impedance injectors the hiccups of the past should be eliminated and driveability should be much improved all the while being able to support gasoline and ethanol content to 100%. These are not recommended for VP Import or C16 as the seals can swell, reducing efficiency, however gasoline and ethanol are supported.
Injector sets are flow matched to within 0.48% of each other to insure precision fueling for each cylinder.
Questions and install instructions are available by email sales@ ttp-engineering.com.
Thanks for looking!
TTP
Thread
Thread Starter
Forum
Replies
Last Post
TTP Engineering
Evo 'For Sale' External Engine / Power
60
Feb 24, 2010 09:53 AM
TTP Engineering
Evo X Dyno Results
38
Nov 30, 2009 07:29 PM
TTP Engineering
Evo Engine / Turbo / Drivetrain
61
Jul 25, 2009 10:23 AM
TTP Engineering
Vendor Announcements
14
May 22, 2009 10:09 PM
TTP Engineering
Vendor Announcements
12
Mar 24, 2009 03:28 PM
