NEW 2011 WORK Emotion 11R-FT - USA Exclusive Edition!
Thread Starter
Former Sponsor
iTrader: (181)
Joined: Jun 2007
Posts: 2,681
Likes: 0
From: Glendale, CA
NEW 2011 WORK Emotion 11R-FT - USA Exclusive Edition!
DRIVELINEMOTORING
NEW 2011 WORK Emotion 11R-FT - USA Exclusive Edition!
With 2011 right around the corner, there are many new additions to the WORK Wheels lineup.
One release we are specifically excited about is the "USA Edition" WORK Emotion 11R-FT. Featuring Matte Gray Silver (MGS) Finish & Matte Gunmetal (MGM) Finish, these are colors exclusive to WORK Wheels in the USA. On top of that, many of you looking for wider / aggressive fitment will be excited to see 18x10.5 +22 SIZING!
WORK Emotion 11R-FT USA Edition:
1) 18x10.5 Sizing: The 11R-FT is the first Emotion series to have a 10.5" width in the 18" sizing
2) USA Exclusive Finishes: Matte Gray Silver (MGS) & Matte Gunmetal (MGM) are standard finishes on this Emotion 11R-FT.
3) WORK Flowforming Technology (spun forming): The key benefit for flow forming is able to reduce the barrel thickness, thus reducing the weight of the wheel without compromising the strength of the rim barrel. The 11R-FT is a good choice for motorsports racing use or at area where there are smoother roads. Unlike our competitors' flow forming wheels, WORK flow forming wheels start with low-pressure cast construction, whereas some of our competitors use lower quality gravity casting.
4) Big Brake Clearance: Due to the design of the 11R-FT, it is very brake friendly to large OEM calipers along with many aftermarket calipers. The 18x10.5+22 will clear front OEM Brembos along with many aftermarket brake kits. Please always check with us and we can verify if our wheels will clear a specific brake kit.
5) Reduced Weight: By using WORK Flowforming Technology, WORK Wheels was able to save on average ~2.2 lbs. per wheel, while maintaining the engineering strength and integrity.
6) PRICE REDUCTION: In order to produce a competitive product to benefit our customers, we set this wheel at an attractive price point.
7) Proudly Made in Japan: WORK Wheels quality is something we pride ourselves on, and this assures you that the product you sell is of the highest quality and engineering standards.
OFFICIAL PRE-ORDER INFORMATION:
All orders made between now and January 30th will be apart of Work's first-issue arrival. This due to arrive sometime between late-February and early-March. All pre-order 11R FT's will come with valve stems as a standard option. Custom sticker package, Center Caps, Hub Rings, and Lugs Nuts will be an additional cost. Package rates are available upon your request.
Sales Pricing Reference:
FOR OFFICIAL SALE PRICING, PLEASE GIVE US A CALL AT (818) 710-6666!!
NEW 2011 WORK Emotion 11R-FT - USA Exclusive Edition!
With 2011 right around the corner, there are many new additions to the WORK Wheels lineup.
One release we are specifically excited about is the "USA Edition" WORK Emotion 11R-FT. Featuring Matte Gray Silver (MGS) Finish & Matte Gunmetal (MGM) Finish, these are colors exclusive to WORK Wheels in the USA. On top of that, many of you looking for wider / aggressive fitment will be excited to see 18x10.5 +22 SIZING!
WORK Emotion 11R-FT USA Edition:
1) 18x10.5 Sizing: The 11R-FT is the first Emotion series to have a 10.5" width in the 18" sizing
2) USA Exclusive Finishes: Matte Gray Silver (MGS) & Matte Gunmetal (MGM) are standard finishes on this Emotion 11R-FT.
3) WORK Flowforming Technology (spun forming): The key benefit for flow forming is able to reduce the barrel thickness, thus reducing the weight of the wheel without compromising the strength of the rim barrel. The 11R-FT is a good choice for motorsports racing use or at area where there are smoother roads. Unlike our competitors' flow forming wheels, WORK flow forming wheels start with low-pressure cast construction, whereas some of our competitors use lower quality gravity casting.
4) Big Brake Clearance: Due to the design of the 11R-FT, it is very brake friendly to large OEM calipers along with many aftermarket calipers. The 18x10.5+22 will clear front OEM Brembos along with many aftermarket brake kits. Please always check with us and we can verify if our wheels will clear a specific brake kit.
5) Reduced Weight: By using WORK Flowforming Technology, WORK Wheels was able to save on average ~2.2 lbs. per wheel, while maintaining the engineering strength and integrity.
6) PRICE REDUCTION: In order to produce a competitive product to benefit our customers, we set this wheel at an attractive price point.
7) Proudly Made in Japan: WORK Wheels quality is something we pride ourselves on, and this assures you that the product you sell is of the highest quality and engineering standards.
OFFICIAL PRE-ORDER INFORMATION:
All orders made between now and January 30th will be apart of Work's first-issue arrival. This due to arrive sometime between late-February and early-March. All pre-order 11R FT's will come with valve stems as a standard option. Custom sticker package, Center Caps, Hub Rings, and Lugs Nuts will be an additional cost. Package rates are available upon your request.
Sales Pricing Reference:
- 17x7.5: Less Than $1475.00 per set
- 17x8.5: Less Than $1535.00 per set
- 17x9.5: Less Than $1595.00 per set
- 18x8.0: Less Than $1575.00 per set
- 18x8.5: Less Than $1595.00 per set
- 18x9.5: Less Than $1625.00 per set
- 18x10.5: Less Than $1695.00 per set
FOR OFFICIAL SALE PRICING, PLEASE GIVE US A CALL AT (818) 710-6666!!
Last edited by DrivelineSales; Dec 28, 2010 at 04:09 PM.
Thread Starter
Former Sponsor
iTrader: (181)
Joined: Jun 2007
Posts: 2,681
Likes: 0
From: Glendale, CA
This press release was just sent to us yesterday afternoon. Being that this was everything supplied to us, we wont have any more 'promo' photos to supply until they're produced overseas.
Trending Topics
Thread Starter
Former Sponsor
iTrader: (181)
Joined: Jun 2007
Posts: 2,681
Likes: 0
From: Glendale, CA
