Notices
Vishnu Performance - California [Visit Site]

boost on stg 1 map(93 octane)

 
Old Nov 17, 2004 | 07:06 PM
  #1  
gsujeff55's Avatar
Thread Starter
Evolved Member
iTrader: (4)
 
Joined: Sep 2004
Posts: 2,838
Likes: 1
From: GA
boost on stg 1 map(93 octane)

how much boost are you guys seeing on this map? or how much am i supposed to be seing? im getting ~24 tapering down to ~21....is that normal???
Old Nov 17, 2004 | 08:04 PM
  #2  
wthoevo8's Avatar
Evolving Member
iTrader: (1)
 
Joined: May 2004
Posts: 285
Likes: 0
From: Bay Area, Ca.
When I've the stage 1+ setup on 93 octane, it spike up to 24, 25 psi. Shiv tune it back down to 22, 23 peak then taper to 19 psi.
Originally Posted by gsujeff55
how much boost are you guys seeing on this map? or how much am i supposed to be seing? im getting ~24 tapering down to ~21....is that normal???
Old Nov 17, 2004 | 08:06 PM
  #3  
shiv@vishnu's Avatar
Evolved Member
iTrader: (20)
 
Joined: Mar 2003
Posts: 4,941
Likes: 0
From: Danville/Blackhawk, California
Yep.. dial it back to 22psi peak and it will taper naturally down to 18-19psi by redline.

Shiv
Old Nov 17, 2004 | 08:40 PM
  #4  
gsujeff55's Avatar
Thread Starter
Evolved Member
iTrader: (4)
 
Joined: Sep 2004
Posts: 2,838
Likes: 1
From: GA
how would you best suggest to change the table to dial it down?

thanks.
Old Nov 17, 2004 | 09:00 PM
  #5  
shiv@vishnu's Avatar
Evolved Member
iTrader: (20)
 
Joined: Mar 2003
Posts: 4,941
Likes: 0
From: Danville/Blackhawk, California
With your mouse, select the entire boost map (it's labelled either as "unknown" or "boost"). Right click mouse and select "Add Offset". Type -5 and hit enter. This will reduce all values by 5% which will bring boost down a bit. Add or Subtract and offset until you get the peak boost level you desire.

Shiv
Old Nov 17, 2004 | 09:03 PM
  #6  
gsujeff55's Avatar
Thread Starter
Evolved Member
iTrader: (4)
 
Joined: Sep 2004
Posts: 2,838
Likes: 1
From: GA
awesome, thanks brotha.
 


Thread Tools
Search this Thread

All times are GMT -7. The time now is 10:27 PM.