Vishnu at Dyno4mance & SMART tuning seminar Sep 23, 24, 25
Sep 22, 2005, 12:10 AM
#151
Evolved Member
iTrader: (17)
Join Date: Apr 2004
Location: 41° 59' N, 87° 54' W
Posts: 6,224
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by juyanith
I'm waiting until Shiv arrives to make my Xede SMART, and I understand the harness from Vishnu isn't ready yet. What do I need to make one?
(1) 4-pin harness
(1) 5-pin harness
(2) 1-pin connectors
Got some wire to go with it and I am making them as follows:
5-pin male = LC-1 (Black, Green, White, Blue, Red)
4-pin male = Knock Buffer (Red, Black, Yellow, Pink)
1-pin male = LC-1 (Brown)
1-pin male = LC-1 (Yellow)
The female counterparts are them permanently wired into the car (i.e. power, ground, etc.). Also, even though the pins are meant to be crimped, I still put a dab of solder onto the end of each wire.
See the attached wiring diagram that I came up with. It should be fairly complete for all XEDE related accessories... and I managed to keep the Visio layers ... ooooh! (I didn't know Adobe could do that, until it asked me)
l8r)
Sep 22, 2005, 06:51 AM
#152
Thanks for the diagram, Ludikraut -- very nice! I think I see where you're going with the 4- and 5-pin connectors, the SMART connections to the Xede are pretty simple. I'll have to see if I can get to the electronics shop before tomorrow, but it's a little hard with the car at Dyno4mance.
Sep 23, 2005, 12:05 PM
#159
Newbie
Join Date: Aug 2005
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Noize
Just talked to Shiv. He's not on that flight. We're still postponed until tomorrow morning.
Sep 23, 2005, 03:27 PM
#162
Evolved Member
iTrader: (3)
Join Date: Sep 2003
Location: Lafayette, LA (Da Bayou)
Posts: 1,179
Likes: 0
Received 0 Likes
on
0 Posts
I'll be there...... LOL. I am here.
Ludi,
can you get those connectors at like a radio shack or are they a car part specific thing. I would love to use those. Love the visio drawing! I use visio all day at work.
Ludi,
can you get those connectors at like a radio shack or are they a car part specific thing. I would love to use those. Love the visio drawing! I use visio all day at work.
Sep 24, 2005, 08:17 PM
#164
Evolved Member
iTrader: (3)
Join Date: Sep 2003
Location: Lafayette, LA (Da Bayou)
Posts: 1,179
Likes: 0
Received 0 Likes
on
0 Posts
The local stage 3 didn't dyno... Boo Hoo. The only turbo kit has clutch issues.
Hope it's all works out Ludikraut.
I made 300 on 93 with a stage 1++. 320'ish on 96 octane.
I did 3 smart installs and have one more to do in the AM. 2 new and 1 reinstall (don't ask). I found it to be very easy. I will be doing a more detailed write up to help others out. It is not hard at all, it tucks away nice if done correctly. Stay tuned for a write up soon in the Vishnu forums.
SMART Rocks. The part throttle drivability is AWESOME! Lifting is smooth like butter. Iddinit? No sudden jerk. The AFR's rule.
OWNED by SMART!
Hope it's all works out Ludikraut.
I made 300 on 93 with a stage 1++. 320'ish on 96 octane.
I did 3 smart installs and have one more to do in the AM. 2 new and 1 reinstall (don't ask). I found it to be very easy. I will be doing a more detailed write up to help others out. It is not hard at all, it tucks away nice if done correctly. Stay tuned for a write up soon in the Vishnu forums.
SMART Rocks. The part throttle drivability is AWESOME! Lifting is smooth like butter. Iddinit? No sudden jerk. The AFR's rule.
OWNED by SMART!