Props To Tuning Technologies
Props To Tuning Technologies
Last night I had my Xede installed by Tuning Technologies and these guys are great. Knowledgable about the product and super down to earth with their customers. Took the extra time to make sure my car was running perfect and to make sure I understood the XMap software. I definately recommend these guys to anyone is SoCal needing an install of some sort or tune. Hit up Alfred or Chris at Tuning Tech sales@tuningtechnologies.com 
I'll add that the Chris and Alfred were both knowledgable when the opened their shop two years ago. But since then, their learning curve has really skyrocketed. For example, they have gotten really proficient at:
* building 2.3 stroker motors. They have now used several different combinations (at customers request) of rods and stroker pistons. They know what works best and have close relationship with one of the best machinists in the country Benson's
* they have installed just about every brand of turbo kit/turbo upgrade on the market as well. I've seen them do a Vishnu stage 3, Vishnu stage 2, Buschur, AMS, RnR.
* They are also as good or better than anyone when it comes to installing the Xede, SMART, O2 sensors, etc. They have all the firmware for old school v2 folks, and the newest v3 firmware/Xmap as well.
* Their Dynojet 424x is not one of those weaksauce Dynojets that have been converted from a single roller where one roller is huge, and the other is small. They also are one of the only dynojet facilities that has boost logging capabilities.
* I never see them selling unneeded modifications. They will save you money.
* Finally, they have an excellent working relationship with Shiv/Vishnu. So, Vishnu customers can rest assured that Chris or Alfred will call Shiv if needed when they are troubleshooting with an Xede equiped car. (Unlike other shops that would use such an opportunity to sell you another product.)
Sorry about the commercial, but I'm very thankful that Tuning Technologies is near me and I enjoy the best of worlds: Vishnu & Tuning Technologies (AMS ain't bad either
.)
* building 2.3 stroker motors. They have now used several different combinations (at customers request) of rods and stroker pistons. They know what works best and have close relationship with one of the best machinists in the country Benson's
* they have installed just about every brand of turbo kit/turbo upgrade on the market as well. I've seen them do a Vishnu stage 3, Vishnu stage 2, Buschur, AMS, RnR.
* They are also as good or better than anyone when it comes to installing the Xede, SMART, O2 sensors, etc. They have all the firmware for old school v2 folks, and the newest v3 firmware/Xmap as well.
* Their Dynojet 424x is not one of those weaksauce Dynojets that have been converted from a single roller where one roller is huge, and the other is small. They also are one of the only dynojet facilities that has boost logging capabilities.
* I never see them selling unneeded modifications. They will save you money.
* Finally, they have an excellent working relationship with Shiv/Vishnu. So, Vishnu customers can rest assured that Chris or Alfred will call Shiv if needed when they are troubleshooting with an Xede equiped car. (Unlike other shops that would use such an opportunity to sell you another product.)
Sorry about the commercial, but I'm very thankful that Tuning Technologies is near me and I enjoy the best of worlds: Vishnu & Tuning Technologies (AMS ain't bad either
.)
Last edited by Smogrunner; Jan 14, 2006 at 10:01 AM.
Originally Posted by shiv@vishnu
brodienuchies-- Check the name of the XMAP file you are running
Go to "Diagnosis" and check out "XEDE info". I have a bad sense of humor..
-shiv
Go to "Diagnosis" and check out "XEDE info". I have a bad sense of humor..
-shiv
I have to say those guys are really good. they may be far but it's worth every minute of your time. and there dedication to making the customer happy and poviding top notch work is second to none. with reasonable pricing a dyno on the spot so you know where you stand once your car is done being worked on, you can't go wrong with them.
Trending Topics
Newbie
Joined: Feb 2005
Posts: 33
Likes: 0
Originally Posted by Smogrunner
I'll add that the Chris and Alfred were both knowledgable when the opened their shop two years ago. But since then, their learning curve has really skyrocketed. For example, they have gotten really proficient at:
* building 2.3 stroker motors. They have now used several different combinations (at customers request) of rods and stroker pistons. They know what works best and have close relationship with one of the best machinists in the country Benson's
* they have installed just about every brand of turbo kit/turbo upgrade on the market as well. I've seen them do a Vishnu stage 3, Vishnu stage 2, Buschur, AMS, RnR.
* They are also as good or better than anyone when it comes to installing the Xede, SMART, O2 sensors, etc. They have all the firmware for old school v2 folks, and the newest v3 firmware/Xmap as well.
* Their Dynojet 424x is not one of those weaksauce Dynojets that have been converted from a single roller where one roller is huge, and the other is small. They also are one of the only dynojet facilities that has boost logging capabilities.
* I never see them selling unneeded modifications. They will save you money.
* Finally, they have an excellent working relationship with Shiv/Vishnu. So, Vishnu customers can rest assured that Chris or Alfred will call Shiv if needed when they are troubleshooting with an Xede equiped car. (Unlike other shops that would use such an opportunity to sell you another product.)
Sorry about the commercial, but I'm very thankful that Tuning Technologies is near me and I enjoy the best of worlds: Vishnu & Tuning Technologies (AMS ain't bad either .)
* building 2.3 stroker motors. They have now used several different combinations (at customers request) of rods and stroker pistons. They know what works best and have close relationship with one of the best machinists in the country Benson's
* they have installed just about every brand of turbo kit/turbo upgrade on the market as well. I've seen them do a Vishnu stage 3, Vishnu stage 2, Buschur, AMS, RnR.
* They are also as good or better than anyone when it comes to installing the Xede, SMART, O2 sensors, etc. They have all the firmware for old school v2 folks, and the newest v3 firmware/Xmap as well.
* Their Dynojet 424x is not one of those weaksauce Dynojets that have been converted from a single roller where one roller is huge, and the other is small. They also are one of the only dynojet facilities that has boost logging capabilities.
* I never see them selling unneeded modifications. They will save you money.
* Finally, they have an excellent working relationship with Shiv/Vishnu. So, Vishnu customers can rest assured that Chris or Alfred will call Shiv if needed when they are troubleshooting with an Xede equiped car. (Unlike other shops that would use such an opportunity to sell you another product.)
Sorry about the commercial, but I'm very thankful that Tuning Technologies is near me and I enjoy the best of worlds: Vishnu & Tuning Technologies (AMS ain't bad either
.)+1 , I have nothing but great things to say about tuning Technologies, great guys and they do great work
