Hey guys, What do I need to convert my older XEDE from version 2 to a complete SMART setup?

From what I have seen on this site: http://www.vishnutuning.com/XEDE_SALE.htm, I'll need to order a knock buffer, and the SMART kit. Is there anything else I may need to order? Also, how much would this all cost?

I was also planning on sending my XEDE out to Vishnu to have the firmware updated to Ver3 and my maps converted while my car was at Dyno4mance during my clutch install.

Thanks!

 

The SMART package used to include a knock buffer, that changed?

 

i just got my smart kit and buffer friday. the knock buffer is $100 on top of the smart kit. i am having the bung welded in and running most of the wiring and finish it up at the vishnu-tuning day at tt. i am going to have shiv upload v3 and then tune the smart system.

 

Well, on the site I posted above about the XEDE sale, it doesn't look like its included.

So, it's $259 for the SMART kit and $100 for the buffer.

 

Interesting... so yeah, you need the SMART package, the knock buffer, and if Vishnu is doing the updateing for you that's all you need.

- Steve

 

Ok, thanks Steve.

 

wait, stop the presses....Shiv's coming to TT? When? Where's the thread on this?

 

check the vishnu forum, tt tuning trip.. i think it's april 14-15 or 15-16 can't remember. meanmud is coordinating the event

 

I thought this was THE Vishnu forum...is there a whole Vishnu forum out there that I don't know about?

 

yeah, this is the vishnu forum. go to the listing of topics under vishnu forum and you should find meanmud's posts on the tuning trip

 

here you go
https://www.evolutionm.net/forums/sh...d.php?t=178510

 

lol....big mix-up. By TT I thought meant "Tuning Technologies", not "TurboTrix".

ah well!