Stock I/C piping w/ Alky injection

Reply Subscribe

Thread Tools

Search this Thread

Dec 20, 2005 | 07:40 PM

Evo_Jay

Thread Starter

Evolved Member

iTrader: (17)

Joined: Jun 2005

Posts: 3,419

Likes: 14

From: Chico, CA (NOR-CAL)

Stock I/C piping w/ Alky injection

Do you have to get an aftermarket I/C piping when you get alky injection or can you just use your stock I/C piping??

Thanks

Dec 20, 2005 | 10:29 PM

Ultimate CC

Account Disabled

iTrader: (122)

Joined: Apr 2005

Posts: 6,876

Likes: 0

From: Peekskill NY

You can use stock IC piping for alky

Dec 21, 2005 | 10:25 PM

fromWRXtoEVO

Evolved Member

iTrader: (18)

Joined: Sep 2004

Posts: 6,087

Likes: 5

From: Tucson

I agree, you can use the stock IC pipes

Dec 21, 2005 | 11:12 PM

sleet

Evolved Member

iTrader: (9)

Joined: Sep 2003

Posts: 6,197

Likes: 0

From: Ft. Lauderdale

I just hope those T-bolt clamps are gonna be able to hold 25psi+ without popping off.

Dec 22, 2005 | 04:38 AM

Ultimate CC

Account Disabled

iTrader: (122)

Joined: Apr 2005

Posts: 6,876

Likes: 0

From: Peekskill NY

Yea thats where it starts becoming a problem but I have seen a couple people running them so I guess it works ok

Dec 22, 2005 | 04:48 AM

Ryu123

Evolving Member

iTrader: (18)

Joined: Aug 2005

Posts: 182

Likes: 0

From: VA

It'll certainly work with the stock pipe but I think ideally you want the nozzle as close to the TB as possible. I installed the Injen CAI on mine when I install my alky.

Dec 22, 2005 | 06:44 AM

SlowCar

Evolved Member

iTrader: (4)

Joined: Sep 2003

Posts: 3,456

Likes: 0

From: Kingdom of Saudi Arabia

Quote:

Originally Posted by Ryu123

It'll certainly work with the stock pipe but I think ideally you want the nozzle as close to the TB as possible. I installed the Injen CAI on mine when I install my alky.

If you car using tha Hago MW nozzle, you want the nozzle a distance away from the TB.....generally 6 to 8" away to get good air/r-oh mist mixture.