5th Injector, Methanol, and AEM EMS
Thread Starter
Former Sponsor
iTrader: (38)
Joined: Apr 2005
Posts: 1,578
Likes: 0
From: Orlando, FL
5th Injector, Methanol, and AEM EMS
I searched and couldnt find anything relating to this. Would this be possible using this setup for the injector?
http://www.atpturbo.com/Merchant2/me...egory_Code=FUL
I could run a line from my meth pump (SMC Kit) now to the injector, then have the AEM run the 5th injector, come on at a set time, increase duty cycle as boost rises, etc. Im not 100% sure the AEM could do all of this but I just thought I would run it by you guys. I would weld the injector in my up-pipe where the nozzle is now.
Sound like a good idea or a waste of time? It just seems an injector would work better than the typical nozzle.
http://www.atpturbo.com/Merchant2/me...egory_Code=FUL
I could run a line from my meth pump (SMC Kit) now to the injector, then have the AEM run the 5th injector, come on at a set time, increase duty cycle as boost rises, etc. Im not 100% sure the AEM could do all of this but I just thought I would run it by you guys. I would weld the injector in my up-pipe where the nozzle is now.
Sound like a good idea or a waste of time? It just seems an injector would work better than the typical nozzle.
Thread Starter
Former Sponsor
iTrader: (38)
Joined: Apr 2005
Posts: 1,578
Likes: 0
From: Orlando, FL
Trending Topics
Fuel injectors dont last very long spraying methanol. Plus that injector holder is not meth compatible either. If you used ethanol which is far less corrosive it would work very well. The aem can control an additional injector setup with unparralled acuracy.
even better...if the AEM can be used to control a high speed valve like the one from aquamist, capable of open/close, 250 times a second....rather an a massive rotating chunk of steel and copper pump rotor?
You have to use a solid state relay to control the pump like an injector. The output on the AEM is for an injector. Injectors are driven at 5 volts. You cant drive a 12v fuel pump on the 5v output. Driving a FP like an injector is of course to where near as affective as driving and controlling an injector.
Thread
Thread Starter
Forum
Replies
Last Post
OakosAutomotive
EvoX 'For Sale' External Engine / Power
41
Aug 16, 2013 12:47 PM
OakosAutomotive
EvoX 'For Sale' External Engine / Power
193
Nov 2, 2012 09:08 AM
OakosAutomotive
EvoX 'For Sale' External Engine / Power
110
May 14, 2010 12:02 PM
kungfugirl
Lancer Aftermarket Forced Induction Tech
5
Oct 10, 2007 02:07 PM



. Anyone wanna help?

