HEY just need some help finding a good tank for my new system

 

http://fluids.flambeau.com/

http://www.usplastic.com/catalog/pro...uct%5Fid=14120

 

Thank you so much . Exactly what I was looking for also.

 

i am using the flambeau tanks

the US plastic corp tanks are cheap, dont know if they are of the same quality of flambeaus

 

 

so do i get a cap that is vented from the top or threaded vented

 

i went with the flambeau threaded vent - didnt want any dust to get into the tanks

 

SlowCar, are there any connectors needed for the tank or does the Aquamist HFS-1 comes complete with everything except for the tank? Trying to get all the parts before I attempt the install. Thanks.

 

Ryu123:all you need is a tank

 

Man. I have to say that your set-up is very impressive. I've never seen it done like that before. Two questions: 1. Do the tanks come with the mounting brackets? 2. Did you use anything to mount the tanks and the pumps to?

 

Hi there, these are the tanks i got, its got mounting holes on each side of the tank:

http://fluids.flambeau.com/standard_...5.0_quart.html - Item # 062100

The tanks and pump are mounted on 2 aluminum strips bolted to the V brace behind the seat:

 

Awesome! I think your set-up is nice and clean. The only concern that I would have is do you have any problems in keeping a nice flow to the injector given the distance between the pump? I read that it's not recommended to have a long distance on one of the alcohol injection websites.

 

on my aquamist HFS-1 system, the flow sensor shows that once the boost trigger point (10psig) is reach, there is ~1000cc/min methanol flowing from the pump in the trunk to the 2 jets in the UICP. There is no issues of not flowing enough.