Painless has lauched a new PPS system...
Oct 22, 2007, 04:18 AM
#1
Former Sponsor
Thread Starter
iTrader: (5)
Join Date: Aug 2005
Location: England
Posts: 2,236
Likes: 0
Received 0 Likes
on
0 Posts
Painless has lauched a new PPS system...
The WAI market is definitely growing. Painless has just launched a progressive pump speed system, seen on the December issue of "Hotrod magazine"
The system has been done comparative tests with a few known PPS system, all yield the same power, within the acceptable dyno reading deviations.
It does not use an inline CV but comes with a solenoid valve instead.
Good news for the users. Market is getting a bit crowded on the "PPS" format.
The system has been done comparative tests with a few known PPS system, all yield the same power, within the acceptable dyno reading deviations.
It does not use an inline CV but comes with a solenoid valve instead.
Good news for the users. Market is getting a bit crowded on the "PPS" format.
Oct 22, 2007, 03:20 PM
#3
Account Disabled
Join Date: Sep 2007
Location: Rockford, IL
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Again shows Richard's commitment to supporting car guys/gals, being a TRUE Engineer and all around good guy.
Should be an interesting read if they compare different controllers as most PPI systems are very similar with the exception of the controller.
Is the Painless controller boost reference only? If they have two control boxes I would expect it to do more then just be boost activated only.
Yep a number of Shurflo based systems on the market, lots of good choices for the customer. Just like in any other industry, company buy-ups or mergers would be the next cycle.
Best regards,
Dan
Should be an interesting read if they compare different controllers as most PPI systems are very similar with the exception of the controller.
Is the Painless controller boost reference only? If they have two control boxes I would expect it to do more then just be boost activated only.
Yep a number of Shurflo based systems on the market, lots of good choices for the customer. Just like in any other industry, company buy-ups or mergers would be the next cycle.
Best regards,
Dan
Oct 22, 2007, 03:59 PM
#5
Evolved Member
iTrader: (17)
Join Date: Nov 2005
Location: NNJ
Posts: 2,544
Likes: 0
Received 0 Likes
on
0 Posts
The quality of materials and parts appear to be better than some of the stuff sold on other PPS kits.
Although it is not likely to be any more linear than other PPS kits already on the market.
Although it is not likely to be any more linear than other PPS kits already on the market.
Oct 22, 2007, 04:30 PM
#6
Former Sponsor
Thread Starter
iTrader: (5)
Join Date: Aug 2005
Location: England
Posts: 2,236
Likes: 0
Received 0 Likes
on
0 Posts
I assure you, I did't get paid a penny for this post.
People will buy what suits their application, there is no need to feel threaten by a new comer. The market is growing - just like the intercoolers. Water/methanol injection is a sound and proven performace concept, it is the oldest power added known. Henry Ricardo 1921??
