Notices
Water / Methanol Injection / Nitrous Oxide

Devils Own Meth Kit

Old Dec 8, 2007 | 09:22 AM
  #1  
DTM2188's Avatar
Thread Starter
Evolving Member
iTrader: (20)
 
Joined: Jul 2007
Posts: 165
Likes: 0
From: S. Jersey
Devils Own Meth Kit

Does anyone run a Devils Own Meth Injection kit? I see a lot of other brands being used on here by members, but have yet to see Devils Own. When I had my Cobalt, Devils Own and Snow were the two biggest brands used, so I was curious to see if there was a reason that Devils Own wasn't too popular here.
Reply
Old Dec 8, 2007 | 12:56 PM
  #2  
Dapper Dan's Avatar
Account Disabled
iTrader: (28)
 
Joined: Jul 2006
Posts: 1,115
Likes: 0
From: ft. walton beach, FLORIDA
im pretty sure the devilsown kit is for map based cars.....
Reply
Old Dec 11, 2007 | 08:55 PM
  #3  
Ultimate CC's Avatar
Account Disabled
iTrader: (122)
 
Joined: Apr 2005
Posts: 6,876
Likes: 0
From: Peekskill NY
Not really sure, don't know too much about them...but if your looking for snow just let me know :0
Reply
Old Jan 28, 2008 | 01:17 PM
  #4  
Rocket468's Avatar
Newbie
 
Joined: Jan 2006
Posts: 12
Likes: 0
We just have not actively pushed our products here. So many forums out there its hard to keep up. Kinda stretched thin, We are always looking for people interested in being dealers for us.

On Evos our controller should be hooked up to the evo MAF sensor.
Reply
Old Mar 17, 2008 | 05:26 PM
  #5  
SILVER9's Avatar
Newbie
 
Joined: Mar 2006
Posts: 92
Likes: 0
From: NEW ORLEANS
i just have a devils own meth kit install in my car and it works fine
Reply
Old May 17, 2008 | 07:58 PM
  #6  
GTijoejoe's Avatar
Evolved Member
iTrader: (25)
 
Joined: May 2008
Posts: 2,110
Likes: 12
From: Ohio
Devils own will support both map and maf based systems. You can choose.
Reply
Old May 17, 2008 | 09:13 PM
  #7  
Ph3n1x's Avatar
Evolved Member
iTrader: (12)
 
Joined: Aug 2005
Posts: 2,251
Likes: 0
From: ¯\(º_o)/¯
Dont have their kit but have some components. Specifically their nozzles are very good quality.
Reply
Old May 21, 2008 | 07:41 PM
  #8  
blackDSM91's Avatar
Newbie
 
Joined: Jul 2006
Posts: 16
Likes: 0
From: Austin, TX, Chicago, IL, Denver, CO
How is the install on these kits?
Reply
Old May 4, 2010 | 11:10 AM
  #9  
LookThatsMe's Avatar
Evolving Member
iTrader: (40)
 
Joined: May 2009
Posts: 131
Likes: 0
From: NJ
I just installed mine last night but I'm having issues. Not devilsown fault just something I did wrong because when I connect power the pump stays on the whole time regardless if the pressure switch sees boost or not
Reply
Old May 8, 2010 | 04:00 PM
  #10  
karlevo8's Avatar
Newbie
 
Joined: May 2010
Posts: 7
Likes: 0
From: united kingdom
Originally Posted by LookThatsMe
I just installed mine last night but I'm having issues. Not devilsown fault just something I did wrong because when I connect power the pump stays on the whole time regardless if the pressure switch sees boost or not
hi have you wired up the relay as per the instructions ?have you got ignition live and permanent live around wrong way! if you dont get it sorted have a butchers on devilsown site decent forum plenty of help on there
Reply
Old May 12, 2010 | 08:51 PM
  #11  
LookThatsMe's Avatar
Evolving Member
iTrader: (40)
 
Joined: May 2009
Posts: 131
Likes: 0
From: NJ
Originally Posted by karlevo8
hi have you wired up the relay as per the instructions ?have you got ignition live and permanent live around wrong way! if you dont get it sorted have a butchers on devilsown site decent forum plenty of help on there
Yea I wired it up to the relay. As far as the ignition 12v I have it ran to the cig power wire. I uave the pump and tank in the trunk and bought my own hose and ran it along the side of the car. Took the fender off and you see the wiring harness that come from the door panel made a little hole in it and ran the tube up the fender well into the engine bay.
Reply
Old May 13, 2010 | 09:28 AM
  #12  
karlevo8's Avatar
Newbie
 
Joined: May 2010
Posts: 7
Likes: 0
From: united kingdom
Originally Posted by LookThatsMe
Yea I wired it up to the relay. As far as the ignition 12v I have it ran to the cig power wire. I uave the pump and tank in the trunk and bought my own hose and ran it along the side of the car. Took the fender off and you see the wiring harness that come from the door panel made a little hole in it and ran the tube up the fender well into the engine bay.
did you solve the problem you had in the end
Reply
Old May 13, 2010 | 12:22 PM
  #13  
LookThatsMe's Avatar
Evolving Member
iTrader: (40)
 
Joined: May 2009
Posts: 131
Likes: 0
From: NJ
Yea the pressure switch was bad. I bought it used of my friend for 300 cause he blew his motor and bought a fully built to run race gas and high boost... I ordered a new pressure switch which cost 37 shipped no big deal and it all works great now... Debating if I wanna sell it if I will I'll be asking 220 shipped... Might go fully built with a bigger turbo
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
boostaddikt
For Sale/WTB - Engine / Drivetrain / Power
18
Oct 21, 2014 06:51 PM
dadsgts
Water / Methanol Injection / Nitrous Oxide
6
Sep 18, 2011 09:54 PM
deathangel1812
Water / Methanol Injection / Nitrous Oxide
5
Jul 2, 2009 02:09 PM
NJ_EveOhVIII
Water / Methanol Injection / Nitrous Oxide
2
Jun 19, 2008 01:55 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 03:06 PM.