Notices
West Region Includes AZ, CA, HI, NV, UT.

Best shop in Az for engine rebuild

Thread Tools
 
Search this Thread
 
Old Apr 14, 2006 | 11:52 AM
  #1  
fst4door's Avatar
Thread Starter
Newbie
 
Joined: Aug 2005
Posts: 42
Likes: 0
From: Tolleson, Az
Best shop in Az for engine rebuild

Well I think I may have spun bearing and now I need a reputable shop to rebuild my engine. Only problem I don’t know who to trust all the mods on my vehicle I installed myself but something like an engine rebuild is way way out of my league. Since this will be the first time my car goes to a shop for work I would appreciate some suggestions based off of personal experience.

below is a very dark video of how my cars sounds at idle not good


http://videos.streetfire.net/video/C...F09DD1FE3F.htm
Reply
Old Apr 14, 2006 | 09:24 PM
  #2  
Lgkaos's Avatar
Evolving Member
Veteran: Air Force
iTrader: (2)
 
Joined: Oct 2005
Posts: 202
Likes: 0
From: Las Vegas, NV
Originally Posted by fst4door
Well I think I may have spun bearing and now I need a reputable shop to rebuild my engine. Only problem I don’t know who to trust all the mods on my vehicle I installed myself but something like an engine rebuild is way way out of my league. Since this will be the first time my car goes to a shop for work I would appreciate some suggestions based off of personal experience.

below is a very dark video of how my cars sounds at idle not good


http://videos.streetfire.net/video/C...F09DD1FE3F.htm
Sounds like the air in the tires are low, JK.
Tokyo Speed Pros, I've seen some devasted Evos come out like new from there. Check out there site and give them a call!
Reply
Old Apr 14, 2006 | 09:25 PM
  #3  
FastCoEVO's Avatar
Evolving Member
iTrader: (1)
 
Joined: Feb 2006
Posts: 383
Likes: 0
I would say ither Mynes or Dyno-Comp
Reply
Old Apr 18, 2006 | 02:06 PM
  #4  
bluesti's Avatar
Newbie
 
Joined: Dec 2003
Posts: 3
Likes: 0
From: Chandler,AZ
i would say go to a machine shop that specializes in engine builds.. most likly thats all any company out here will do. Or Go to a shop that has a certified mechanic.
Reply
Old Apr 18, 2006 | 02:08 PM
  #5  
Annual's Avatar
Evolving Member
iTrader: (4)
 
Joined: Sep 2005
Posts: 127
Likes: 0
From: Arizona
Mynes definately wont let you down.

Give them a call and talk to Jay.
Reply
Old Apr 18, 2006 | 04:46 PM
  #6  
bluesti's Avatar
Newbie
 
Joined: Dec 2003
Posts: 3
Likes: 0
From: Chandler,AZ
Jay is a good guy and hes starting to be very well known for his good service as well as tuning ... But I wasnt aware they built motors.
Reply
Old Apr 18, 2006 | 04:47 PM
  #7  
Annual's Avatar
Evolving Member
iTrader: (4)
 
Joined: Sep 2005
Posts: 127
Likes: 0
From: Arizona
Mynes all they do is evo's im sure they could do it for you.
Reply
Old Apr 18, 2006 | 06:28 PM
  #8  
Mike@Mynes's Avatar
Account Disabled
iTrader: (64)
 
Joined: Feb 2006
Posts: 396
Likes: 0
From: Mesa, AZ
Annual: we do Mini's, BMW's, 350Z's, Supra's, Scoobies and Evos... just so happens that Evo's are the ones that show up at the shop most of the time. The lifts are pretty much occupied right now and i don't think we can accommodate another 'big' job... but a good machine shop will be able to put that motor back together. Give us a call and we can give you some pointers.

Bluesti: we built 2.4L for evos The setup that's on the Shop 8 and the Black Evo

Mike
mynesperformance.com

Last edited by Mike@Mynes; Apr 18, 2006 at 11:03 PM.
Reply
Old Apr 18, 2006 | 09:59 PM
  #9  
Lgkaos's Avatar
Evolving Member
Veteran: Air Force
iTrader: (2)
 
Joined: Oct 2005
Posts: 202
Likes: 0
From: Las Vegas, NV
Originally Posted by mwbmw
Annual: we do Mini's, BMW's, 350Z's, Supra's, Scoobies and Evos... just so happens that Evo's are the ones that show up at the shop most of the time. The lifts are pretty much occupied right now and i don't think we can accommodate another 'big' job... but a good machine shop will be able to put that motor back together. Give us a call and we can give you some pointers.

Bluesti: we built 2.4L for evos The setup that's on the Shop 8 and the Black Evo

Mike
Do you guys have a website? What's your location?
Reply
Old Apr 18, 2006 | 10:05 PM
  #10  
Tim@AMSperformance's Avatar
Former Sponsor
iTrader: (34)
 
Joined: Nov 2003
Posts: 250
Likes: 0
From: Illinois
call AMS they can send a built motor to you and then you can send in yours as the core
Reply
Old Apr 19, 2006 | 08:27 AM
  #11  
gaijin's Avatar
Evolving Member
iTrader: (1)
 
Joined: Feb 2005
Posts: 393
Likes: 1
From: AZ
Originally Posted by Lgkaos
Do you guys have a website? What's your location?
www.mynesperformance.com and there is a map on the site.
Reply
Old Apr 19, 2006 | 09:45 AM
  #12  
Karash's Avatar
Evolved Member
iTrader: (6)
 
Joined: May 2003
Posts: 1,274
Likes: 1
From: Okie in PHX
Hey Mike, I heard that Motec is coming out with a plug and play ECU for the evo (or that it is already out)...any truth to that?
Reply
Old Apr 19, 2006 | 10:27 AM
  #13  
fst4door's Avatar
Thread Starter
Newbie
 
Joined: Aug 2005
Posts: 42
Likes: 0
From: Tolleson, Az
Thanks for all the advise. I think I’ll give Mynes a call once I hear back from my tech about what’s wrong with my vehicle
Reply
Old Apr 19, 2006 | 04:31 PM
  #14  
b0ostedEV08's Avatar
Former Sponsor
 
Joined: Jun 2004
Posts: 117
Likes: 0
From: Arizona
Originally Posted by Karash
Hey Mike, I heard that Motec is coming out with a plug and play ECU for the evo (or that it is already out)...any truth to that?
They have it already, but only work without issues on Jap/Euro/AUS version evo 7-8
Reply
Old Apr 19, 2006 | 06:02 PM
  #15  
Lgkaos's Avatar
Evolving Member
Veteran: Air Force
iTrader: (2)
 
Joined: Oct 2005
Posts: 202
Likes: 0
From: Las Vegas, NV
Originally Posted by gaijin
www.mynesperformance.com and there is a map on the site.
Oh, Ah, I get it..my bad.

I thought you posted there was a place CALLED ANNUAL! Ahhh...yea I know Mynes, Jay tuned my IX w/EcuTek.
Reply



All times are GMT -7. The time now is 06:51 AM.