Las Vegas Evo's
I won't be dynoing this time. Slippin clutch. I just suspect the evo will make more power then all the subies, thats all.
But Caballero STi Jim I think has a 35r. If nothing is wrong with his setup, it should do well.
Last edited by BoostN; Jan 14, 2007 at 11:43 PM.
Food poisoning ftl
Hey guys all the parts are off the evo.
Steve already has the brake kit and radiator. Sold the rps twin carbon, injectors and zeitronix as well.
What I have left is below
Gram light 57f(forged) 18x8.5 with 245 40 18 michellin pilots
tein hg 16x16 coilovers with track and rally setup included+ comber plates
buschur front mount intercooler wiht lower pipe for evo 8
mini battery kit
walboro 255 lp hp fuel pump
brushed aluminum radiator shield
hks cam gears
hks 280 cams
ecu+
metal mr bov
espelier 3 catback with downpipe and cat delete pipe
rear control arm bushings
dejon two stage manual boost controller medium/high boost
3 guage pod for pillar
2 guage pod for steering column
tons of an fittings and stainless steel lines
3 nos bottles
misc nos solenoids and fittings(pretty much can make at least one complete kit
set of 4 nos stainless steel nozzles
Let me know if you want to come over and check out any of the items. Almost all of it is pretty new or very few miles.
Steve already has the brake kit and radiator. Sold the rps twin carbon, injectors and zeitronix as well.
What I have left is below
Gram light 57f(forged) 18x8.5 with 245 40 18 michellin pilots
tein hg 16x16 coilovers with track and rally setup included+ comber plates
buschur front mount intercooler wiht lower pipe for evo 8
mini battery kit
walboro 255 lp hp fuel pump
brushed aluminum radiator shield
hks cam gears
hks 280 cams
ecu+
metal mr bov
espelier 3 catback with downpipe and cat delete pipe
rear control arm bushings
dejon two stage manual boost controller medium/high boost
3 guage pod for pillar
2 guage pod for steering column
tons of an fittings and stainless steel lines
3 nos bottles
misc nos solenoids and fittings(pretty much can make at least one complete kit
set of 4 nos stainless steel nozzles
Let me know if you want to come over and check out any of the items. Almost all of it is pretty new or very few miles.
Last edited by gofaster87; Jan 15, 2007 at 05:41 PM.
to Doug's Dyno Power to have Clark tune I'm real excited 
