Reno Area anybody?
i had issues with my whole clutch install.
it still is so hard to get into gear ever since we put the twin disk in but the pedal is all the way out and engages so high. i need to remove the restictor i think.
anyone else have issues like that with the exedy twin.
kinda wishing i got an ACT now.
when and where for the meet. anyday except the weekend and thursday works for me. ideas?
it still is so hard to get into gear ever since we put the twin disk in but the pedal is all the way out and engages so high. i need to remove the restictor i think.
anyone else have issues like that with the exedy twin.
kinda wishing i got an ACT now.
when and where for the meet. anyday except the weekend and thursday works for me. ideas?
Me too, we need a real meet, so far its been like me and 2 others and thats not much of a meet. Hey, we finally got the damn throw out bearing off after 2 days of struggling with it! Worst part of the uninstall of the stock clutch, and allan at modified was relieved to have finally got the stock clutch out. ACT should be going in this afternoon after the flywheel gets re-surfaced. Anyone else have that problem with the throw out bearing? What a PITA!
^ It was a hassle. Problem now is that the car was put all back together, and i started it for the first time, and whoaaaa........a loud *** constant rattle...sounds like the flywheel or plate. It rattles in idle with the clutch pedal down and up. So allan looked under the car and thinks that the pressure plate was not lined up correctly and it is out of balance, creating the loud rattle. So the car has to be taken apart again, and i dont have a ride now till its fixed. Anyone hear of this issue? Is this the pressure plate, or something else?
that same problem happened to my old gsx it rattled while idling in the tranny area. i just replaced the clutch but came to find out the pressure plate wasn't lined up properly. don't worry alan'll get it right.
^Thanks, and thats what it was, he got it fixed and said it was a washer not lined up properly. Glad its done so i can have my car back finally! While the car was on the lift heres some things i fixed up: -Capped off nipples for the boost controller, modified downpipe so it wouldnt rub on ACD anymore, - refilled all tran and clutch fluids. It should be running great now. Hope to see everyone this weekend at the meet.
Sparks Marina
heres a couple shots of my RS and RenoEvo's IX at Sparks Marina celebrating celebrity status..we just finished having our cars filmed for Allied Washoe Petroleum's TV commercial











^Thanks, and thats what it was, he got it fixed and said it was a washer not lined up properly. Glad its done so i can have my car back finally! While the car was on the lift heres some things i fixed up: -Capped off nipples for the boost controller, modified downpipe so it wouldnt rub on ACD anymore, - refilled all tran and clutch fluids. It should be running great now. Hope to see everyone this weekend at the meet.
Let's organize another meet a little in advance. How's one of the up coming Saturdays and a run up to either VC or LT? Chime in on which Sat is most convenient for you guys. I can do pretty much any Sat after memorial day weekend. Maybe we could also organize either a bbq or poker run or something that involves a little more than just standing around.
Nice new rims RenoEvo. So what channel/when can we catch this commerical?
Nice new rims RenoEvo. So what channel/when can we catch this commerical?
Let's organize another meet a little in advance. How's one of the up coming Saturdays and a run up to either VC or LT? Chime in on which Sat is most convenient for you guys. I can do pretty much any Sat after memorial day weekend. Maybe we could also organize either a bbq or poker run or something that involves a little more than just standing around.
Nice new rims RenoEvo. So what channel/when can we catch this commerical?
Nice new rims RenoEvo. So what channel/when can we catch this commerical?


