***Official NV Chat Thread***
Not sure if anyone needs there cars washed... My buddy does mobile detailing at a good price. I have him wash all my cars and he always does an exceptional job.
Give him a call or text. His name is Peter. Number is there on the side of the trailer.
Price starts at 30$ for inside and out wash, vacuum, tire and wheel clean
Give him a call or text. His name is Peter. Number is there on the side of the trailer.
Price starts at 30$ for inside and out wash, vacuum, tire and wheel clean
Hey guys, I need to get a tune, how much to do it at Dougs Dynopower? if i remember correctly its like 250I wanted to tune for E85 but I believe my injectors and fuel pump is too small so I might just tune for pump gas... For now. pick up a fuel pump and i think nils has some injectors that he is selling in the west market place. check it out he might have an extra pump too for a good price Also do I need a wideband installed? If so, still not sure on which one to get. Any suggestions? And where would I go to get a bung welded on?
hope that helps out. good luck .
Just got back from Dougs this morning after the Hallman MBC install and cranked up to 26.5lbs of boost.... put down 311whp/315tq
And this was kinda cool.... just an FYI cuz it was really driving me crazy..... I was having problems idling with AC on .... just put the clutch in and let off the gas and it would stumble hard and sometimes die... Doug said the map in the car was good so it had to be IAC valve or the throttle body was dirty.... Long story short... the TB was caked with nasty sticky black **** that once it was cleaned out idles beautiful and AC on and all.... also freed up the mechanism to move smoother.
By the way Akuma.... Doug will tell you that you don't need a wideband..... and the e85 tune with the install of my Walbro and PTE 1000 injectors was $275 or $300 giving him so much money lately i can't remember.... that's with dyno runs and everything.
And this was kinda cool.... just an FYI cuz it was really driving me crazy..... I was having problems idling with AC on .... just put the clutch in and let off the gas and it would stumble hard and sometimes die... Doug said the map in the car was good so it had to be IAC valve or the throttle body was dirty.... Long story short... the TB was caked with nasty sticky black **** that once it was cleaned out idles beautiful and AC on and all.... also freed up the mechanism to move smoother.
By the way Akuma.... Doug will tell you that you don't need a wideband..... and the e85 tune with the install of my Walbro and PTE 1000 injectors was $275 or $300 giving him so much money lately i can't remember.... that's with dyno runs and everything.
Quote:
Originally Posted by onewickedninelv
Hey guys, I need to get a tune, how much to do it at Dougs Dynopower? if i remember correctly its like 250I wanted to tune for E85 but I believe my injectors and fuel pump is too small so I might just tune for pump gas... For now. pick up a fuel pump and i think nils has some injectors that he is selling in the west market place. check it out he might have an extra pump too for a good price Also do I need a wideband installed? If so, still not sure on which one to get. Any suggestions? And where would I go to get a bung welded on?
you dont need one to tune , doug has all that covered. if you want to monitor it afterwards you can get one.
hope that helps out. good luck
Thanks! I guess I should have said I already have installed a Walboro 255lph fuel pump and I have but not yet installed 880cc PTE injectors. Which I figure is too small to go E85.
Originally Posted by onewickedninelv
Hey guys, I need to get a tune, how much to do it at Dougs Dynopower? if i remember correctly its like 250I wanted to tune for E85 but I believe my injectors and fuel pump is too small so I might just tune for pump gas... For now. pick up a fuel pump and i think nils has some injectors that he is selling in the west market place. check it out he might have an extra pump too for a good price Also do I need a wideband installed? If so, still not sure on which one to get. Any suggestions? And where would I go to get a bung welded on?
you dont need one to tune , doug has all that covered. if you want to monitor it afterwards you can get one.
hope that helps out. good luck
Thanks! I guess I should have said I already have installed a Walboro 255lph fuel pump and I have but not yet installed 880cc PTE injectors. Which I figure is too small to go E85.
oh, well then sell the injectors and step it up to some 1000cc . or call up doug maybe he can make them work, as long as you dont have an aftermarket turbo, it could work. good luck.