Evo9 Fp Cams

FP4R:http://store.forcedperformance.net/m.../145FP4RV2.pdf
Exhaust: 0.429 or 10.9 mm
Intake: 0.438 or 11.13 mm

FP5R:http://store.forcedperformance.net/m.../145FP5RV2.pdf
Exhaust: 0.470 or 11.94 mm
Intake: 0.475 or 12.1 mm

I am running they FP4R's and they are a really good cam I was impressed with the gains, seemed to pick up a lot of torque. They seems to be an aggressive cam, and great for a daily as well.

 

I lose, but on the bright side my cams will be here today yay

 

Which ones did you buy?

 

you can't lose if you get your cam's today.

 

I'm just getting some hks 272's because I don't feel like changing my springs lol I'm lazy. And it still feels like I lost. Maybe when I'm actually holding the cams will I feel better haha.

 

oh i thought it was just the 264's you didnt have to change springs. thank you i'll be gettin cam's and don't know if i wanna change springs yet either

 

Depending on how aggressive they are. Like what was already said not all 272's are the same , some have a lot higher lift. Hks are fairly mild with their lifts and can be used with stock valvetrain. It is recommended that you stay with the stock rev limit though ( I never shift above 7-7.2k).

 

why not do springs well your in there doing the cams?

 

I'm a cheap *** and there is no point as I don't need to rev high and the extra lift isn't big enough to have any negative effects on anything.

I just bought :

Cams
FP wga
tactrix cables/ evo scan
aem Wideband
Powerflex front engine mount

I am now poor , and school is starting the 10th sooo lol. Shame on me.

Also Got tephra mod loaded to my computer holla!

 

Does anyone have this tool I could borrow? maybe rent whatever ? Its the timing belt tensioner tool


Ken garff *** ***** weren't very helpful......


http://www.camskill.co.uk/products.p...7b0s2059p12845

 

Just find out the thread pitch of the tool and go to the bolt and nut store and buy a really long bolt with the same threads and that's it. No need to pay 60 bucks for the tool for a One time use.

 

werd searching now lol, thanks.

 

lol i'm a big panzy i shift at 6-6.5. my srt redlined at 6 so i'm just still gettin used to higher revs

 

Lol I'm an old Honda Guy. I revved my del sol to 8.7k everyday. I sucks having a slower car lol

 

http://www.plymouthlaser.com/ttool.htm

F√ck yeah ^^^

Cams didn't come today

Tomorrow will hopefully be a glorious day....