meDave's 4G Eclipse build
#20
Newbie
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: San Francisco, Calif.
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
The down pipe needs to be welded up yet, so it was leaking really bad. This was just a test run to make sure I had no oil leaks. I didn't want to seal it up until exhaust was completely done, and everything cleared ok. I'm super busy at work right now, so won't work on it till the weekend.
#22
Newbie
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: San Francisco, Calif.
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
My Turbo to axle exhaust.
3.0" piping, no cat, Cherrybomb, and dual axleback
3.0" Turbo to Axle Exhaust
3.0" piping, no cat, Cherrybomb, and dual axleback
3.0" Turbo to Axle Exhaust
Last edited by meDave; Jun 5, 2012 at 11:45 PM.
#24
Newbie
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: San Francisco, Calif.
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
I'm also using the WRX 440's. Yeah, I'll be using the F/IC for the time being. (until reflash software is done and readily available) The unit has an onboard MAP sensor which reads boost, (up to 27 PSI) and is reliable. It's just our ever learning ECU that makes it a challenge.
#26
Evolved Member
iTrader: (2)
Does anyone know if you can flash a ralliart rom onto the eclipse auto ECU? My buddy is getting ready to turbo his and it seems like there is more support for the ralliart definition files than the eclipse. Also, how hard is it to disable all the O2 sensors? Doesn't make much sense they ran extra ones on the eclipse. Should have kept the manifold the same
#27
Evolved Member
iTrader: (5)
Does anyone know if you can flash a ralliart rom onto the eclipse auto ECU? My buddy is getting ready to turbo his and it seems like there is more support for the ralliart definition files than the eclipse. Also, how hard is it to disable all the O2 sensors? Doesn't make much sense they ran extra ones on the eclipse. Should have kept the manifold the same
#28
Evolved Member
iTrader: (2)
06 2.4 automatic. I'll look into it. I saw some stuff about fastworks on the 4g forum. But It seemed like guys were also using ecuflash. Some guys said about flashing Evo Roms on them. But I don't know if anyone actually done it without swapping the ECU out. Being that he has an auto, I didn't even want to try it.
#29
Evolved Member
iTrader: (5)
Evo roms will not flash to a 4g ECU.
the ecu flash method is not as simple, and requires a different program for datalogging. Either way you need to pay for a base tune and definition. I like fastworks because it works well, does everything in one program, it's really easy to use, and hackish has been supporting this platform for over 6 years...
the ecu flash method is not as simple, and requires a different program for datalogging. Either way you need to pay for a base tune and definition. I like fastworks because it works well, does everything in one program, it's really easy to use, and hackish has been supporting this platform for over 6 years...
#30
Evolved Member
iTrader: (2)
Originally Posted by CrAnSwIcK
Evo roms will not flash to a 4g ECU.
the ecu flash method is not as simple, and requires a different program for datalogging. Either way you need to pay for a base tune and definition. I like fastworks because it works well, does everything in one program, it's really easy to use, and hackish has been supporting this platform for over 6 years...
the ecu flash method is not as simple, and requires a different program for datalogging. Either way you need to pay for a base tune and definition. I like fastworks because it works well, does everything in one program, it's really easy to use, and hackish has been supporting this platform for over 6 years...
I really need to mess around with my lancers tune. Been neglecting it since I got my Evo. Really considering going back to MAF, the speed density tune is so annoying. I might try the tephra rom before going back. The startups are all over the place. Can't seem to fine tune them. Actually debating on throwing a 4g69 or 4g64 in it and starting from scratch.