Minimum IPW
#199
Same issue here. Just installed fic 2150cc injectors and its running 11.5afr at idle but i cant get the patch to work Im running the 95630706 v7 rom. This is my daily and would like to get the patch to work so i can sort it out. Is there a speacial place to input the code in rom data?
#200
Evolving Member
Same issue here. Just installed fic 2150cc injectors and its running 11.5afr at idle but i cant get the patch to work Im running the 95630706 v7 rom. This is my daily and would like to get the patch to work so i can sort it out. Is there a speacial place to input the code in rom data?
#202
88570008:
Code:
<table name="Minimum IPW #1 SHLL8->NOP (0x4908 -> 0x0009)" category="Misc" address="26d92" type="1D" scaling="Hex16"/> <table name="Minimum IPW #2 SHLR2->NOP (0x4908 -> 0x0009)" category="Misc" address="26d94" type="1D" scaling="Hex16"/> <table name="Minimum IPW #3 SHLL->NOP (0x4900 -> 0x0009)" category="Misc" address="26d96" type="1D" scaling="Hex16"/> <scaling name="IPW16:SHLL0" units="ms" toexpr="x*8/1000" frexpr="x*1000/8" format="%.3f" min="0" max="65" inc="0.008" storagetype="uint16" endian="big"/> <table name="Minimum IPW SHLL0" category="Misc" address="1102" type="1D" scaling="IPW16:SHLL0"/>
#203
Hi DOodz!
90550001:
After doing the code changes (top 3) you will then need to use the "new" Minimum IPW SHLL0 table to set your Minimum IPW - you will need to replace what the stock value is with ~1.1 or whatever you want. Feel free to use +/- keys to increment/decrement
Cheers
D.
90550001:
Code:
<table name="Minimum IPW #1 SHLL8->NOP (0x4818 -> 0x0009)" category="Misc" address="227b8" type="1D" scaling="Hex16"/> <table name="Minimum IPW #2 SHLR2->NOP (0x4809 -> 0x0009)" category="Misc" address="227ba" type="1D" scaling="Hex16"/> <scaling name="IPW16:SHLL0" units="ms" toexpr="x*4/1000" frexpr="x*1000/4" format="%.3f" min="0" max="65" inc="0.004" storagetype="uint16" endian="big"/> <table name="Minimum IPW SHLL0" category="Misc" address="1502" type="1D" scaling="IPW16:SHLL0"/>
Cheers
D.
I tried the Patch above on an Evo7 ECU 90550701 and what it does is strange, first I only see two entries vs three for every other rom, and secondly whenever the Min IPW is touched, the Maf filtering low is changed as well.
Doesn't seem right. Can anybody help? I need to get some fic2150 going on pump gas and this patch would really help.
Attachment of pic for reference
Last edited by SiriusEvo; Apr 9, 2015 at 02:27 PM.
#204
Evolved Member
2150's you will need too mess with other start settings as well. Here is what I have with e85 but it should still start just rich.
Attachment 241478
Attachment 241478
Last edited by 2winscroll; Mar 22, 2016 at 08:41 PM.
#205
I can't get the patch to work with my 96532706 Tephra V7 rom.
I did insert the patch but the min ipw seems to be set at 0.04ms (have not changed anything yet).
If I insert the values like you should do and set it to 1.028 or even 0.7ms it will still run pig rich.
Is there anything I'm doing wrong? Can't figure out what.
Injectors are 2150 FIC.
I did insert the patch but the min ipw seems to be set at 0.04ms (have not changed anything yet).
If I insert the values like you should do and set it to 1.028 or even 0.7ms it will still run pig rich.
Is there anything I'm doing wrong? Can't figure out what.
Injectors are 2150 FIC.