Notices
ECU Flash

Did my first log

Thread Tools
 
Search this Thread
 
Old May 2, 2013, 11:33 AM
  #1  
Evolved Member
Thread Starter
iTrader: (11)
 
aggieEVO's Avatar
 
Join Date: Jun 2010
Location: Rockwall, TX
Posts: 1,310
Received 8 Likes on 8 Posts
Did my first log

I'm having some issues with my laptop and with EvoScan in general. If I restart the computer it has trouble connecting up and I have to restart. Says it can't find certain files. I'm going to try to use a different laptop later.

Did my first log-vgg5s9z.jpg

Also attaching my log.

Things I've noticed:

TPS is at 96.x%. I guess I need to adjust.
I didn't have as much knock as I thought I would, but it's also just one pull. I'll try to get several in later.

Mods:
Rewired Walbro 255
Perrin MBC at around 18psi.
TephraMod V7

Can't log boost, yet, and I didn't feel it was worth logging A/F without a wideband.

Thoughts or suggestions?

Crap, you can't attach a .csv?

Last edited by aggieEVO; May 2, 2013 at 11:37 AM.
Old May 2, 2013, 11:52 AM
  #2  
Evolving Member
iTrader: (17)
 
STLEVOIX's Avatar
 
Join Date: Mar 2012
Location: STL
Posts: 364
Received 5 Likes on 5 Posts
why 18PSI?
Old May 2, 2013, 12:01 PM
  #3  
Evolved Member
Thread Starter
iTrader: (11)
 
aggieEVO's Avatar
 
Join Date: Jun 2010
Location: Rockwall, TX
Posts: 1,310
Received 8 Likes on 8 Posts
I asked around and was told it was safe to run with everything else stock.

Originally Posted by STLEVOIX
why 18PSI?
Old May 2, 2013, 12:26 PM
  #4  
Former Sponsor
iTrader: (12)
 
Boosted Tuning's Avatar
 
Join Date: Jun 2005
Location: Chico, CA (Nor-Cal)
Posts: 2,383
Likes: 0
Received 7 Likes on 5 Posts
Originally Posted by aggieEVO
I asked around and was told it was safe to run with everything else stock.
Stock is 19psi and you can up it a couple psi.
Old May 2, 2013, 12:33 PM
  #5  
Evolved Member
 
foxbat's Avatar
 
Join Date: Oct 2009
Location: UAE
Posts: 926
Received 15 Likes on 15 Posts
You can attach csv files in zip files.
Don't start tuning without having a wideband kit to log AFR.
Make sure that the car has no boost leaks.
You could tune the car without having to log boost.
If properly tuned, you could run higher boost (25-26psi) especially if using 93 or higher fuel.
Old May 2, 2013, 12:37 PM
  #6  
Evolved Member
Thread Starter
iTrader: (11)
 
aggieEVO's Avatar
 
Join Date: Jun 2010
Location: Rockwall, TX
Posts: 1,310
Received 8 Likes on 8 Posts
Thanks guys, I may leave it where it is for a bit. I still have a dirty stock filter in the airbox. I'm going to replace that before I crank the boost at all.

I haven't done a boost leak test, yet, but I'm hoping to build a tester soon.
I'm not planning to tune until I get a wideband, that's one of the first things on my list. Just trying to get a feel for logging.

I'm running 93.

I did 2 more pulls. My only substantial knock is down low in the same spot that's shown in this log.

It just started raining. No more pulls today on crappy tires
Old May 3, 2013, 07:38 AM
  #7  
Evolved Member
Thread Starter
iTrader: (11)
 
aggieEVO's Avatar
 
Join Date: Jun 2010
Location: Rockwall, TX
Posts: 1,310
Received 8 Likes on 8 Posts
Glad I got TephraMod on yesterday. Getting some knock in strange places. 5th gear mid RPM part throttle. I guess it's during spool. I'll be careful there until I can figure it out.
Old May 3, 2013, 07:43 AM
  #8  
Evolved Member
iTrader: (27)
 
evo8426's Avatar
 
Join Date: Jan 2006
Location: Charlotte, North Carolina
Posts: 4,248
Received 8 Likes on 8 Posts
Is there any reason as to why you rewired the Walbro? - EDIT: Never mind, I read through your build thread and seen the previous owner did it.

The easiest way to post up logs is to use winzip and then attach the file into a post.

Last edited by evo8426; May 3, 2013 at 07:55 AM.
Old May 3, 2013, 12:34 PM
  #9  
Evolved Member
Thread Starter
iTrader: (11)
 
aggieEVO's Avatar
 
Join Date: Jun 2010
Location: Rockwall, TX
Posts: 1,310
Received 8 Likes on 8 Posts
Yeah, he was running an EF3, I think. Guess he needed a little more fuel.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
UxC
Evo X Engine Management / Tuning Forums
2
Dec 19, 2016 08:43 AM
danike
09+ Ralliart Engine/Turbo/Drivetrain
7
Apr 22, 2014 03:52 AM
SudzRA
09+ Ralliart Engine/Turbo/Drivetrain
7
May 18, 2011 09:28 AM
Mellon Racing
General Engine Management / Tuning Forum
3
Dec 18, 2007 07:19 PM
Titanium
ECU Flash
3
Apr 3, 2007 04:24 PM



Quick Reply: Did my first log



All times are GMT -7. The time now is 07:34 AM.