babaz7

yesterday a mechanic installed a new walboro fuel pump in my evo 8, while taking out the old one he instead of disconnecting the clips, accidently pulled hard on the wires and detached the wires from the clips...

when he installed the new pump, he put the wires back in the clips and put inside the car, the car didnt start, he pulled the fuel line to see if fuel was getting to the fuel rail, there was nothing..

i think he connect the wires wrong and may have blown a fuse or worse?

when i connected the new pump and the old one directly to the cars battery both worked fine,..so is it the fuse or something else?

adriano_917

iTrader: (14)

check the wiring and check to see if the wires are in the right place, also check for voltage on the pigtail.