So I've been a member here for about 2.5 years or so, haven't really posted much, but browse from time to time. I figured it was time to post my car. Heres some pics and then a complete mod list.














And then this for good measure:




Mod List:
XXR 527's 17x8.25 +20 in Flat Black
Falken Ziex 502 215/40/17's
OZ struts
Tenzo R springs
Powerstop slotted and drilled rotors
Powerstop Evo series pads
Ken style body kit
Votex generator
Shorty Antenna
Depo Evo style headlights
RRM evo style carbon fiber grill
Injen SRI
Optima Yellow top battery
5mm spacers in the rear
Custom 2.5'' exhaust with Netami muffler
NRG racing buckets
NRG seat brackets
KYOUU rally seat bases for evo8
Interior repainted black from the stock grey
Suede and black fabric reupholstered rear seat
Custom stereo including:
-Sony Xplod headuint
- custom rearseat speaker setup with
-2 6.5'' Sony Xplod speakers
-2 4x6'' Sony Xplod speakers
-front door speakers all replaced with Sony Xplod 6.5'' speakers
- Custom trunk set up with:
- 2 12'' 1200watt Son Xplod Subs
-1 1000watt Sony Xplod Amp
All stereo work inclunding boxes was done by me
-Hand laid carbon Fiber A pillars
Tinted Tails
20% Tint windows
Freedom design rear strut brace

Might be more stuff, but thats what I can remember off the top of my head.

So what do you guys think?

Oh and I'm picking up the AIT racing GT carbon fiber hood in about a week.

 

omg dude.. that thing is sick looks clean and simple. I like it

 

very nice. white on black looks great. love the wheels. nice audio install too.

 

Thanks guys, the audio is fixing to come out and be repainted since it doesnt really match anymore. I used to have rims that were that color green.

And I just finished repainting some dash trim pieces, and I am in the process of doing a minor tuck and relaction of stuff in the engine bay.

 

dam bro looks even better then in your facebook pics dude

always gana be a favorite of mines
keep it up

 

Thanks man. If you knew all of the bull**** that I've gone through to get it like this, most poeple woulda just said screw it. My car has been hit 3 times now. LOL

Oh and if anyone is wondering how hard it is to run 8''+ rims with low offset, be prepared for "fun". I had to take out all my front fender lining, flatten the body seam on the firewall in the front wheel well, but im still running on parts of the body when I turn at full lock. The bakc was worse. Had to roll, and pull quite a bit to get them to fit. THen I had to move the mounting location for the bumper farther back, about 3 inches, and in the process had to push the side of the bumper out about an inch and then had to get in there with the grinder, heat gun and hammer to flat stuff and move stuff out of the way so I could stop eating into my tire when I hit a bump.

Oh and I can no longer carry 4 people, its just me and a passenger in the front now.

Worth it though

 

meaty fitment!

 

Thanks, next set of rims and tires will be 17x9 with 235 tires. Eventually I will have a one off widebody.

 

two thumbs up!

 

Woww super hot lancer, well done!
Where did you buy the grill behind the front bumper?

 

Thanks!!

And I have no clue, my body shop had it and put it in when I had the kit painted and put on. But it is regular automotive grill mesh, you can get it on ebay for cheap if I recall correctly.

 

i wanted to take this off the making a grill page. 1st your car is amazing and just it does give me someting to shoot for when doing mine. but i cant do as much casue of my little butt face having a kid kinda sucks but what type of carbon fiber hood are you going to get, and what type of rear bumper do you have?

 

Thanks alot! Honestly, I'm not sure which rear bumper it is, I got the whole kit ( front bumper, back bumper, and sideskirts) on a trade for two 10''subs. It was brand new, so I can't help, I'll tell you I dont like it and will be getting rid of it as soon as possible. The wheel well looks like a tear drop from the side. But this is the hood I'm getting next tuesday:


I think it will really make the car look more agressive.

And take your time with the car sir, just save and slowly do stuff, I've had this car and been working on it for 3 years. With a job for only 1.5 of those 3 years. So it can be done. Just be smart about what your going to do. You dont want to have to waste money by deciding what you did really isnt what you wanted.

 

i saw that hood awhile ago and really liked it i just have never of the brand so i dont know how good the carbon fiber is and how long it will last with out fading. i had to put primer over mine cause it faded to much. i kinda want to do a sebion evo style hood, roof, and trunk with a nice peal white. is yours stock white casue in one of the pics it looks like your car has some pearl in it?

 

i like the sticker and zip tie repair. cool looking n funny