can someone post instructions for the timing box.. my timing box for 06 ralliart never came with instructions...

 

sure i can. Ok locate the map sensor. Its at the top left side of the intake manifild. It sorta looks like 2 plugs into one. It has red one the end of it with a piece of metal(clip) holding it secure. This piece you need to push up. Start with a flathead screw driver. Find where the metal clip starts. Use the driver to push this piece up. Once that is done remove the plug and insert the etcb. It only plugs in one way. Fasten the clips down and go. You should disconnect the battery b4 working on it of course. Take the black off first(of course). Once its all reconnected let it idle for 10-15 minutes and go. Enjoy the power. God i love rrm. Hope it helps pm if you need further instructions

 

just for clarification purposes... the metal clip will be on the little black section right next to the red piece... you DONT want to pull the red piece itself away or else you will probably break your sensor... it goes like so

red piece --> black part with clip --> then MAP sensor

 

very true DO NOT PULL OUT THE RED PIECE. Lol that would be bad. Anywho id take a pic but my phone is broken soon as i get a new one ill post it

 

yeah ok perfect that was easy, and i definatley noticed the gain.. so far i have RRM UDP, CAI, and now timing box, next up im thinking RRM headers/dp/hi-flow cat/magnaflow catback exhaust.. unless someone wants to suggest anything i should get done before that?

 

i just installed my timing box but i was wondering wheres the best place to tape the timing box too, right now i just wrapped it around the engine bay with some tape
where did u guys put yours?

 

Why don't you take 3M double sided tape and tape it on your engine bay somewhere ? It could look way much better than duck tape

 

I zip-tied mine to the little metal tubes located next to the MAP sensor

 

Switched from RRM SRI to RRM CAI: Feels like I lost a bit of low end power, but there are noticeable gains above 4000 or so. I'll prob get the UDP to hopefully get some of my low end back.

 

i dont have a review on this part however i would like to know if anyone has seen or heard of this performance part

http://cgi.ebay.com/ebaymotors/Perfo...171|240%3A1318

 

hey guys please check out these to vids for me. I would like opinions on my current setup and if you guys think its running about as fast as normal. It feels like a rocket and sounds awesome. btw may be selling it so pm if interested.

http://www.youtube.com/watch?v=zG6VbSgf1uY

http://www.youtube.com/watch?v=7CaXRQmmPs8

copy and paste in web browser if hyperlink doesnt appear not sure if i did it right sry. enjoy

ps first one is preview and shows my setup

 

Ya IMO all them ebay mod boxes are crap. For 28 bucks lets be real a 4000 dallor turbo doesn't add 100 hp. Theres no way a little box that no ones knows what it even does is going to .

 

Ya IMO those Ebay mod boxes are crap. Lets be real there is no way a 28 dollar box is going to give you 100 hp. A 4000 dollar turbo doesn't give you 100 hp. I myself or i'm guessing most people don't even know what those boxes actually do. GARBAGE

 

If you're selling it, I might be interested into the timing control box. PM me if you are.

 

Mr. B the box isnt from ebay its from rrm which i stated in the clip. 260 bux is more like it and ask rock est. 10 hp