Notices
04-06 Ralliart Engine/Drivetrain (no forced induction)

CEL problems with RRM CAI

Thread Tools
 
Search this Thread
 
Old Mar 31, 2006 | 09:28 AM
  #1  
bigd3245's Avatar
Thread Starter
Newbie
 
Joined: Mar 2006
Posts: 7
Likes: 0
From: savannah, GA
CEL problems with RRM CAI

I have read most of the post that I can find. I have called RRM and taken it to the Mitshu ppl but I still can't get rid of the CEL. Any help??? I have checked all the fittings. I have even put a small bead of silacon around the MAS to seal it up tight. I backed the air filter out some just to make sure I was getting the right flow. And I have reset the computer and let the car idel for about 10 mins. Any other suggestions??
Reply
Old Mar 31, 2006 | 09:41 AM
  #2  
mitsutech005's Avatar
Evolved Member
 
Joined: Jun 2004
Posts: 562
Likes: 0
From: Flint, Texas
what was the code that mitsu pulled?
Reply
Old Mar 31, 2006 | 10:23 AM
  #3  
Myszkewicz's Avatar
Evolved Member
iTrader: (2)
 
Joined: Jun 2004
Posts: 3,158
Likes: 6
From: Central Florida
Here we go again...


Make sure the filter isn't installed too far onto the end of the CAI pipe.

Make *SURE* the MAS is installed correctly. If you had to lay a bead of silicone on it to get it to seal, it's probably not right.

Make sure the CAI - rubber intake hose connection is tight.


Once all that checks out, then reset your ECU. If you still get a CEL, get the code pulled and come back here.
Reply
Old Mar 31, 2006 | 11:10 AM
  #4  
bigd3245's Avatar
Thread Starter
Newbie
 
Joined: Mar 2006
Posts: 7
Likes: 0
From: savannah, GA
Myszkewicz yeah I have done all that I can read. I wouldn't have asked has I not done the normal stuff. I believe that the code was high mass airflow.
Reply
Old Mar 31, 2006 | 11:29 AM
  #5  
Eclipse2Lancer's Avatar
Evolved Member
iTrader: (1)
 
Joined: Oct 2004
Posts: 1,739
Likes: 1
From: .
make sure the MAS is in correctly.....could it be backwards?
Reply
Old Mar 31, 2006 | 11:31 AM
  #6  
bigd3245's Avatar
Thread Starter
Newbie
 
Joined: Mar 2006
Posts: 7
Likes: 0
From: savannah, GA
oH you mean you are supose to put that thing back in??
Reply
Old Mar 31, 2006 | 01:08 PM
  #7  
ralliart 04's Avatar
Evolving Member
iTrader: (1)
 
Joined: Dec 2005
Posts: 269
Likes: 0
From: voorhees n.j
Originally Posted by bigd3245
oH you mean you are supose to put that thing back in??
haha, hold on , your kiding right ?

hey, why dont you get a good and upclose pic of your set up and the position the sensor is in so we can take a look at it .
Reply
Old Mar 31, 2006 | 01:31 PM
  #8  
bigd3245's Avatar
Thread Starter
Newbie
 
Joined: Mar 2006
Posts: 7
Likes: 0
From: savannah, GA
yes I was kidding. just to let everyone know I ahve the arrow on the MAS pointed to the rear of the car. Can we get pass this.
Reply
Old Mar 31, 2006 | 01:36 PM
  #9  
bigd3245's Avatar
Thread Starter
Newbie
 
Joined: Mar 2006
Posts: 7
Likes: 0
From: savannah, GA
it is looking like something I am prob just going to have to live with.
Reply
Old Mar 31, 2006 | 01:49 PM
  #10  
ROCK's Avatar
Former Sponsor
iTrader: (67)
 
Joined: Dec 2001
Posts: 7,826
Likes: 3
From: Santa Fe Springs, CA.
Originally Posted by bigd3245
it is looking like something I am prob just going to have to live with.
Call us again. The filter being on too far on the pipe is another thing some guys do but check it out. CAi does not cause CEL. this is for sure.

ROAD/RACE
Reply
Old Mar 31, 2006 | 02:30 PM
  #11  
otter's Avatar
EvoM Administrator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (14)
 
Joined: Jun 2004
Posts: 8,624
Likes: 14
From: Seat 8A
How is your car running? If it feels like it's in limp mode, your MAF could be toasted.
Reply
Old Mar 31, 2006 | 02:57 PM
  #12  
mitsutech005's Avatar
Evolved Member
 
Joined: Jun 2004
Posts: 562
Likes: 0
From: Flint, Texas
hi mas air flow? never heard of this. what was the numeric code, and ill check on it for you.
Reply
Old Mar 31, 2006 | 10:45 PM
  #13  
k3lv's Avatar
Evolved Member
iTrader: (12)
 
Joined: Feb 2006
Posts: 1,736
Likes: 0
From: Vancouver
I also ran into CEL, but it shouldnt be a problem. Otter is right, check if your car is running fine, fine as in normal, and not just "enough" to get you somewhere safe(like home). If your car revs normal, drives normal then most likely nothing is wrong. My CEL went away after my work shift of 8 hrs, though its probably still in the computer.

btw this is unlikely, but check that your gas tank cap is on correctly
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mace1890
Lancer Engine Management / Tuning Forums
12
Jun 2, 2011 08:54 PM
lancerchk_oz
Lancer Engine Tech
10
Apr 21, 2011 03:19 PM
Raikiri
04-06 Ralliart General
43
Dec 21, 2009 10:41 PM
byc_panty
04-06 Ralliart Engine/Drivetrain
8
Nov 30, 2007 11:37 AM
grubiaco
Lancer Troubleshooting
7
Nov 22, 2004 12:39 PM




All times are GMT -7. The time now is 11:58 AM.