Haltech Tuned - Interceptor on the way!
Thread Starter
Evolved Member
Joined: Jul 2006
Posts: 1,839
Likes: 0
From: Australia
Haltech Tuned - Interceptor on the way!
Hey guys,
I've taken up RPW's offer to get my 06 Ra tuned by Haltech.
Basically Haltech will be testing the new interceptor for our cars and if all goes well, should produce something nice for our RA's and something that may be considered as a mod in the near future for all!
http://www.haltech.com.au/interceptor.htm
I'll be getting free tuning, installation and labour. This should be good and can't wait. Should be another week before Haltech gets in contact.
Will keep you guys updated.
I've taken up RPW's offer to get my 06 Ra tuned by Haltech.
Basically Haltech will be testing the new interceptor for our cars and if all goes well, should produce something nice for our RA's and something that may be considered as a mod in the near future for all!
http://www.haltech.com.au/interceptor.htm
I'll be getting free tuning, installation and labour. This should be good and can't wait. Should be another week before Haltech gets in contact.
Will keep you guys updated.
Last edited by MITVRX; Dec 11, 2006 at 06:36 AM.
Thread Starter
Evolved Member
Joined: Jul 2006
Posts: 1,839
Likes: 0
From: Australia
Lol otter.
I just can't wait. It should be another week, and then my baby goes in for two days. Should recieve the car before Christmas. Better recieve the car before Christmas! lol. Actually I will, cause Haltech will be closed - haha
So yeah, torque ftw
= 
I just can't wait. It should be another week, and then my baby goes in for two days. Should recieve the car before Christmas. Better recieve the car before Christmas! lol. Actually I will, cause Haltech will be closed - haha
So yeah, torque ftw
=
Trending Topics
Evolved Member
Joined: Apr 2002
Posts: 697
Likes: 1
From: Perth, Western Australia
Oh forgot to add - no Exede is nothing like the haltech interceptor. Maybe in theory both being a piggy back but that is where the simularity ends. The haltech and exede systems are not compatible at all.
we are all excited about it - once its released RPW will be producing a baseline map for everyone, with wiring harness, and any order through RPW will be coming with a free Shift Light once we set things up.
Not to say that it shouldn't be tuned on a dyno.
These won't become officialy for sale until after xmas - but that shoudl give everyone plenty of time to start saving some money.
I Can see this will become a very popular product.
Not to say that it shouldn't be tuned on a dyno.
These won't become officialy for sale until after xmas - but that shoudl give everyone plenty of time to start saving some money.
I Can see this will become a very popular product.
Thread Starter
Evolved Member
Joined: Jul 2006
Posts: 1,839
Likes: 0
From: Australia
The supporting mods are:
1. RRM Pulley
2. RRM CAI
3. RPW Header/Downpipe
4. 2.25" Catback w/ 2 Resonators ; Magnaflow Muffler
A good combination for a tune!
Also have the intake manifold gasket yet to be installed. Recently installed RPW Rally Spec Short Shifter
This should be good.
I will post before and after dyno charts. It will be interesting to see the numbers it pulls on its current modifications. I know I have lost a whole heap of low end, so obvious when going for it. Mid-top is gained very little.
Anyways, should see and know something by Monday/Tuesday.
1. RRM Pulley
2. RRM CAI
3. RPW Header/Downpipe
4. 2.25" Catback w/ 2 Resonators ; Magnaflow Muffler
A good combination for a tune!
Also have the intake manifold gasket yet to be installed. Recently installed RPW Rally Spec Short Shifter
This should be good.
I will post before and after dyno charts. It will be interesting to see the numbers it pulls on its current modifications. I know I have lost a whole heap of low end, so obvious when going for it. Mid-top is gained very little.
Anyways, should see and know something by Monday/Tuesday.
Evolved Member
Joined: Mar 2005
Posts: 687
Likes: 0
From: Ponce P.R.
Remember to post actual temperatures so we can get an idea about needing tuning according to different temps. Remember that this was the cause for concern about RRms piggy being tuned in Cali type temps. That and the difference in size of the CAIs ie. Injen, AEM and RRM
Thread Starter
Evolved Member
Joined: Jul 2006
Posts: 1,839
Likes: 0
From: Australia
No problem, its being tuned by Haltech, they should be able to give me accurate information. If anything, you can always ask Dave from RPW to confirm with Haltech as well.
Cheers!
Cheers!