Notices

Ashtray LED Bulb

Thread Tools
 
Search this Thread
 
Old Dec 29, 2013 | 02:20 PM
  #1  
EdT's Avatar
EdT
Thread Starter
Evolving Member
 
Joined: Jul 2004
Posts: 245
Likes: 0
From: Montreal, Quebec, Canada
Ashtray LED Bulb

I was tired of paying $5.00ea for those OEM T5 bayonet incandescent bulb in the ashtray that would last only 6 months and wanted to replace it with a long life LED bulb. Locally they wanted $12 for the same LED bulb, so I got on eBay and got a half a dozen for under $1.00 shipped.

You will require to do some modifications since the plastic lens is a bit taller than the regular bulb and the ashtray will not seat properly. I just used a Dremel to cut the plastic lens down to the same height as the OEM bulbs and then polish the lens until it is transparent clear with a buffing wheel on the Dremel.

I got the clear white LED bulbs with this seller here and it took about 3 weeks for them to get here, not complaining since shipping was included and where else can you do a great mod for under $1.00 !
http://www.ebay.com/itm/161048459783...S:1123&vxp=mtr


Last edited by EdT; Dec 29, 2013 at 02:34 PM.
Reply
Old Dec 29, 2013 | 02:28 PM
  #2  
CrAnSwIcK's Avatar
Evolved Member
iTrader: (5)
 
Joined: Sep 2010
Posts: 7,472
Likes: 89
From: Ontario, Canada
not bad...seems like a fair bit of work...any pics of the finished product?
Reply
Old Dec 31, 2013 | 09:52 AM
  #3  
nekkidlad's Avatar
Evolved Member
iTrader: (4)
 
Joined: May 2010
Posts: 1,064
Likes: 2
From: LEXINGTON, KY
lol...i remember when i replaced my ashtray light...
i bought a replacement bulb at the local auto parts store and it lasted like 2 days...
so i replaced it again, and it lasted about 2 more days...
so then i said screw it...i don't need a light in the ashtray anyway...IMO it's so dim and it's located so far down in the ashtray it's useless if anything is in it anyway...

good deal on the 6 for under a buck tho...hope it works for ya and last longer than a few days..lol
Reply
Old Dec 31, 2013 | 10:26 AM
  #4  
CrAnSwIcK's Avatar
Evolved Member
iTrader: (5)
 
Joined: Sep 2010
Posts: 7,472
Likes: 89
From: Ontario, Canada
I used the red hvac bulbs cause I ordered extra, for the cigarette lighter ring and the ashtray...they still work as far as I know, I never open the ashtray and nothing goes in there...lol, I should actually start keeping coffee change in there cause the pile of change in my cup holder is glued together with old coffee...
Reply
Old Dec 31, 2013 | 12:28 PM
  #5  
nekkidlad's Avatar
Evolved Member
iTrader: (4)
 
Joined: May 2010
Posts: 1,064
Likes: 2
From: LEXINGTON, KY
yeah i replaced the one in the lighter ring too...that worked fine till the day i sold it...
but the ashtray one didnt..and after 2 times i didn't care to try it again...

ps: for change, maybe you should start using the door map pocket...it's larger....lol
and no chance of spilled coffee....(untill you start overfilling it and the change flies out everytime you open and close the door or hit a hard bump...lol)
Reply
Old Dec 31, 2013 | 07:44 PM
  #6  
RacerX-Ralliart's Avatar
Evolved Member
iTrader: (3)
 
Joined: Nov 2011
Posts: 642
Likes: 2
From: San Francisco, CA
I just put my change in the compartment that covers the fuses, as for the ashtray light I replaced it and it never work and I don't use it so didn't really care..
Reply
Old Jan 2, 2014 | 05:15 AM
  #7  
bakuro117's Avatar
Evolved Member
10 Year Member
Photogenic
Photoriffic
Liked
iTrader: (5)
 
Joined: May 2011
Posts: 1,850
Likes: 36
From: Cynthiana, KY
I didnt even know my ashtray had a light until I was painting my center console and found a wire leading to the ashtray... hahahaha.

I still need to do that red HVAC bulb swap now that I think about it. Also need to tighten up my cigarette lighter its kinda loose.
Reply
Old Jan 3, 2014 | 03:15 PM
  #8  
CrAnSwIcK's Avatar
Evolved Member
iTrader: (5)
 
Joined: Sep 2010
Posts: 7,472
Likes: 89
From: Ontario, Canada
I need red bulbs for my CD player, but they are tiny surface mount incandescent lamps...I coloured them years ago, but over time they turned orange.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lightsaber
Evo X General
12
May 24, 2017 08:37 PM
Sir_Lancer_Lots
Lancer Troubleshooting
15
Apr 8, 2014 08:14 PM
AUTO Design
Lancer Ralliart Vendor Classifieds
14
Oct 12, 2012 11:11 PM
Curt@MrLed
Evo 'For Sale' Electronics / Lighting / Audio
147
Mar 28, 2011 09:47 PM
wiretap
Lancer Show / Shine
39
Aug 7, 2005 05:19 PM




All times are GMT -7. The time now is 06:08 PM.