Notices
09+ Lancer Ralliart General Discuss any generalized technical factory turbocharged Ralliart related topics that may not fit into the other forums.

Periodic Maintainence ( inspection)

Thread Tools
 
Search this Thread
 
Old Apr 16, 2009 | 04:37 AM
  #1  
shabsralliart's Avatar
Thread Starter
Evolving Member
 
Joined: Nov 2008
Posts: 118
Likes: 0
From: toronto
Periodic Maintainence ( inspection)

I'm at 5000 Miles right now, already got my oil change a month ago ( mobil Synthetic) and am good for another 2 months of driving minimum......but I started getting a periodic inspection sign that shows up in dash every time the car starts. Any of you out there seen this?
Reply
Old Apr 16, 2009 | 05:09 AM
  #2  
EsRt2evo's Avatar
Evolved Member
iTrader: (7)
 
Joined: Sep 2007
Posts: 539
Likes: 0
From: Pgh, PA to Orl, FL
Yeah you can reset it by holding in the 'info' button.
Reply
Old Apr 16, 2009 | 05:28 AM
  #3  
DatRAzn's Avatar
Evolved Member
15 Year Member
Photogenic
Photoriffic
Liked
iTrader: (2)
 
Joined: Dec 2008
Posts: 1,003
Likes: 7
From: Michigan
Yeah, turn the "key" into the ON position but down crank the engine over. Move over to the wrench and hold down the INFO button, it'll say CLEAR, and hit it again. That should clear out the sign.

I had this come up earlier this month, and was needing an oil change anyway, so I just took it to the dealer to get the whole thing inspected. So, after a 38 (WHAT!?) dollar oil change, and some Asian kid going apesh!t crazy in the service department because the retards @ Arnold Mitsu (anyone from mich...don't take your RA, or any car for the matter, here. ) decided to put mineral oil when I already have full synthetic. And..the owners manual says to use synthetic. Idiots. /rant
Reply
Old Apr 16, 2009 | 07:33 AM
  #4  
shabsralliart's Avatar
Thread Starter
Evolving Member
 
Joined: Nov 2008
Posts: 118
Likes: 0
From: toronto
Originally Posted by EsRt2evo
Yeah you can reset it by holding in the 'info' button.
Cool thanks
Reply
Old Apr 16, 2009 | 07:34 AM
  #5  
shabsralliart's Avatar
Thread Starter
Evolving Member
 
Joined: Nov 2008
Posts: 118
Likes: 0
From: toronto
Originally Posted by DetroitRA
Yeah, turn the "key" into the ON position but down crank the engine over. Move over to the wrench and hold down the INFO button, it'll say CLEAR, and hit it again. That should clear out the sign.

I had this come up earlier this month, and was needing an oil change anyway, so I just took it to the dealer to get the whole thing inspected. So, after a 38 (WHAT!?) dollar oil change, and some Asian kid going apesh!t crazy in the service department because the retards @ Arnold Mitsu (anyone from mich...don't take your RA, or any car for the matter, here. ) decided to put mineral oil when I already have full synthetic. And..the owners manual says to use synthetic. Idiots. /rant
Ouch. That bites. Hope the car was not too messed up. They hopefully did a complete engine flush before they put you back on the synthetic.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
justindxin
Toronto Lancer Club
4
May 20, 2010 02:06 PM
BABYGOTBACK
Lancer How To Requests / Questions / Tips
15
Oct 13, 2009 02:46 PM
camillejorge8
Lancer Troubleshooting
2
Jul 20, 2009 06:15 AM
asng
Evo X General
4
Mar 6, 2009 12:55 PM
REDLINEGTS
Lancer Troubleshooting
10
May 25, 2007 04:07 PM




All times are GMT -7. The time now is 07:03 PM.