I know they have a Navi installation kit that includes the bezel.
Dealer list is $450. MZ360180EX or MZ360192EX
It's expensive because it includes wiring harness and control modules.

There's a good install thread in the Evo X section.
https://www.evolutionm.net/forums/ev...-evo-10-a.html

 

That's what I was saying but they can order the bezel by itself if you have the part# of the bezel, it's just not listed in the computer by itself.

 

You need the whole "kit". It isn't just snap in the bezel and go. You need that kit, as listed, and a Navigation Unit. If you have Bluetooth, you CANNOT get a navigation unit that is N-02 or below. It won't work.

 

Why do you need just the bezel. If you just need it because you have everything else for the MMCS install then you are good. But it is wider then a normal double din so if you are going after market this won't help you.

 

The whole kit is the bezel, a steel bracket for the navi, and the wiring harness. I only would like the bezel. It's not for a navi but for other idea's I have.

 

If this is the case, Scosche is the way to go:

http://www.scosche.com/car-audio/product/1652

That bezel fits just fine, and it costs $59.

 

Gotcha. You can get the JDM part 73165A from jdmparts

See:
https://www.evolutionm.net/forums/ev...ive-metra.html

 

You find out that part number ...? I am interested 2

 

The scosche kit does not look oem quality IMO, plus I wanted the wider opening of the stock bezel vs. the JDM double din.

 

couch couch can we all agree metra dash kits need a recall >.<

 

I just did a swap to the MMCS and it was an N-02. My bluetooth works fine.