I installed a set of BC coilovers on my 09 Ralliart yesterday.

I was able to do this in my home garage without any special tools etc. Had no issues with fitment and was able to dial in the front end to -2 degrees negative camber with little effort. (had to take the car to a shop for the alignment)

I wanted this much camber as a starting point as the car will be on the track this weekend and I can dial it out at the pillow ***** later for street use.

The rebound adjustment attachment (cable extension) routing for the rear coilovers was a bit tricky but worked out well.

All in all happy with the units. I got them from Darkside Engineering for under $1K delivered.

 

Are these the ones you are talking about? These are on their website going for 1,750$

 

No the one I installed are a different version without the remote reservoir. They are titles as "BC Racing coilovers" on the evo 8 page. When I ordered I just added a note that I wanted them for a Ralliart as instructed by Darkside as they are not listed on their web page yet.

 

Post pics asap please

 

Thanks for the review. Post some pictures of your ride!

You also ordered the BR Series

 

^Could you please divulge a little info in regards to the type and why it fits the 09 Ralliart please. I am curious if you could announce an official release on this product if all is good on our cars.

 

thats great we need picz


i dont see it on the website?? we can i order a set for the RA??

 

He's talking about this set here

http://www.darksideengineering.com/p...6c7d3d7d4f1495

 

cant wait to see pics. maybe one day i will get me some

 

Are the coil overs for the Ralliart the same spring rate as the EVO X?

 

What do you wants pics of? The car ride height etc can be stock or up to 2+ inches lower. As they are already on not really much to take pics of. Let me know happy to assist.

Mark

 

Pics of it slammed. Or lowerd a bit so it tucks a little.

 

I would like to see how it looks with the wheel off on front and rear and of the pillow ball mounts inside the engine bay. I am totally stoked for you man.

 

soo are these for the RA? or which one is it?? kus it sounds like there for the evo 8/9??

 

pics of the car lowered.